Norcal Spotted and BS Thread

It was mounted horizontally for the forklift, yes. Pretty sure you can use it vertically, as well. Or so I've been told.

 

I think you need to change the valve for veritcal. Or I have to for horizontal with my tank. Easy to do though.

Get it @Overlanerd

If it is too big I have a use for it.

I also have a second 6lb sitting in my garage. A lot of people have said they wanted it but no one has brought dough. 6lb makes a lot of tacos.

 

You do need to change them or you run the risk of having liquid come out vs gas, which is bad.

 

40 lbs. About 33.5 inches tall, by about 35 inches around.

 

oh thats a beast. Someone that wants it for a home firepit should grab it. It will last a good amount of time.

 

Thanks Don. Too big for my rig. Horizontal mount on the front or inside a trailer would work well.

@jAndyMendo whattup with that 6 lb. tank? I have an 10" deep medical chest (not the one I had on the DV trip) that would be perfect for it...

 

its just hanging out in my garage

 

Anyone hop on this? Dibs if not

 

Wish I saw this before I ended up with a 48 and a 60

 

The link to the relay instructions are particularly useful as it shows several styles and what each pin does, all on one page, thanks

 

@tyfoon11 did. @Holloman is 2nd.

Sorry MJ!

2 jacks for 2 spares

 

All good. My hi-lift doesn't even work anymore lol. I'll need a new one

 

Wire wheel, rattlecan gloss black, and this:

$29 Hi-Lift Jack FK-1 Fix-it-Kit Repair Kit

https://www.amazon.com/Hi-Lift-FK-1-Jack-Fix-It-Kit/dp/B00042K37O

Unless you're getting a 60"...

This drawer system worked pretty well in the 5' bed with the quick- release base.



Edit: if it hasn't had a lot of use, grease should work. Mine's 10 years old and brake cleaner and tri- flow always gets it going again.

 

Yea I just need to lube it up. Nothing I can't handle

 

Iggy what size was it that fits in this chi bumper I got from you

 

I did the same thing...

The 48" wouldn't even lift a tire off the ground on my pick up. (Using the slider as a lift point) My 60" barely does it but I usually chain the axle to the frame so I don't have to lift it so high.

 

Never even thought of jacking my truck to make sure the highlift will get the rear wheel in the air.

 

I'd watch that for $5.

 

Make it $10 and I'll let you help