Missing hardware for oem trifold 2016

If it helps anyone, I have the front seals / moulding leftover from my tonneau.

 

You are right! I have been looking for the cover in my area and haven't been able to find one. I found one, but it was for 5' bed and mine is 6'. I went to the dealer today and they want to charge additional $700 for the rails(helps it fold) and other hardware (bolts and brackets) cost additional $300 some dollars. I am just going to return it tomorrow. I wish I had picked tonneau cover as accessory when I was buying the truck. I think it was only about $750 all together.

 

Just spend the $300 on the hardware. I pulled my rails off and cut them with a dremel tool in about 45 minute. Looks exactly like it does from the factory. I picked my tonneau up with all hardware minus rails for $280.

 

Which rails are you talking about? Are you talking about the side rails or the rails that helps cover to fold on top of each section?

 

I got a factory tonneau cover 5 feet great condition for $500 if anyone is interested

 

I wish it was 6' I would have bought it

 

You really got me thinking about cutting the rails Do you have any pictures and how you did it? I appreciate the help!

 

Those are really hard to find if u do find one then it'll be gone quick

 

Here is a write up that someone did. It is great write up.

https://www.tacomaworld.com/threads/oem-tonneau-cover-install.444415/

 

Yep, that's the thread I used to do mine. It couldn't be any easier. Just have a small dremel tool and a pair of safety glasses. Start at the cab and pull the rails straight up. They'll pop right out.

 

Got bored and priced everything out including the 3 tonneau sections:



Tonneau Cover
Part Number: 64903-09010
Remove
$159.20 $159.20

Tonneau Cover
Part Number: 64902-09010
Remove
$159.20 $159.20

Tonneau Cover
Part Number: 64901-09010
Remove
$215.68 $215.68

Striker Cover
Part Number: 69415-04040
Remove
$8.09 $8.09

Striker
Part Number: 69442-04030
Remove
$17.58 $17.58

Striker
Part Number: 69442-04010
Remove
$15.28 $76.40

Striker Cover
Part Number: 69415-04020
Remove
$7.84 $39.20

Side Panel Cap
Part Number: 62541-04010
Remove
$25.68 $25.68

Side Panel Cap
Part Number: 62542-04010
Remove
$25.68 $25.68

Front Reinforced Pin
Part Number: 64933-04010
Remove
$4.65 $4.65

Screw Hexalobular
Part Number: 90148-A0006
Remove
$0.75 $1.50

Fastener Tonneau Co
Part Number: 64949-04010
Remove
$2.82 $33.84

Protector
Part Number: 66249-04070
Remove
$97.40 $97.40

Protector
Part Number: 66248-04070
Remove
$97.40 $97.40


$961.50 + tax + shipping. The bedrails kill the shipping increasing it by $100. Curious, does the trifold sections include all the gaskets or are these also bought separately? I saw this PN 64917-04010 from https://www.tacomaworld.com/threads/2016-tonneau-cover.480897/#post-14659218

 

do they have the little hinge piece with the gasket attached to it? Mine broke and the dealer said its not covered due to normal wear and tear

 

$961 is cheap for this cover. I am not sure if you are missing some parts or not, but when I went to the dealer they charged me $800 dollars for just 3 pieces of folding pannels alone and $331 dollars for the hardware which only included nuts and bolts and other hardware that goes under the side railings and they wanted additional $700 for the 3 hinges that connect all three pieces together so each piece can fold on top of each other. Person at the parts counter told me it will come out close to 2 grand with tax if I wanted to get all the pieces individually. At that point I said forget this and returned all the stuff and ended up buying Bakflip MX4 and I am freaking glad I didn't buy this cover. Here is copy of invoice for just the hardware alone.

 

Sounds about right... B&M dealerships without coupons or specials are about 2-3x easily for parts that I can buy from the same dealers even through their online store. Example: oil drain plug washers-- dealers around me wont budge beyond like $2/ea when online I can get a whole 10-20 pack for not much more than that.

 

From my measurements, these screws are countersunk M6 25mm pitch 1.00. If you want to saveyourself for$30.

 

Do you still have these? If so, i'll take them

 

Are these still available?

 

where I get all the brakets to put my factory cover

 

We’re I can get all this brakets