What Have You Done To Your 2nd Gen Tacoma Today?

I'm using no oil on the uni filter. Cleaning intervals.... just do the visual check. If it looks dirty then it is. Pretty simple.

 

I got mine here. Little cheaper.
http://m.ebay.com/itm/231134267941

 

The oil usually gets sucked into what ever it's filtering. Best to run it dry.

 

Yup. I ran into this today. The PO monkeyed em up doing something to the truck.

My Quick Fists and D rings came in today. Amazon Prime is the best.

I added the D rings to the driver side bed rail no problem. Passenger side not so much. Stripped the heads on 2 of the bolts. They match the stripped one on the front rail, I now have 3 total that need fixed.

Im gonna take a cut off wheel to em and cut a slot in em and put a flat screw drive in the slot and give it a few good hammer whacks and hopefully spin em out. Not looking forward to drillin em out if I cant get em out with the screwdriver.

Im gonna replace em with stainless button caps or phillips head machine screws.

Good thing I like going to the hardware store so much.

 

Yes

 

Pics when done!

 

Where did you find that at?... That's sweat

 

I ordered mine and they sent me an email saying they had an issue with their inventory. They gave me the option to cancel my order if I wanted. I just let it ride and I recieved my filter a couple weeks later than I should have. Not sure why they would have canceled your order without asking first.

 

Definitely will

 

not everyones thing but i like it ...its the small things that make her mine

 

My truck made me work today ..... Power steering is dieing... Ugg there goes $600 or so!

 

​

 

Good morning Chad

 

Moenin!​

 

ok i have a qusetion. right now i have a rough country 3 inch lift. i also have a brush guard and winch, and because of that, the front of my truck sags. i want to get a full 3 inches of lift,and i want to get rid of the spacer and get all new coil overs. i have been looking at toytec and icon, but icon is too expensive. i am looking for the best coil over for the money.

 

First, welcome to TacomaWorld. Second, have you looked at the Billstein offerings?

 

no i have not really looked into billstein

 

Welcome to TW, and yeah, do as G.T. said, check out Bilstein's stuff, solid and affordable. I just threw some 5100's on the front of mine to level it out and it rides very nice.

 

It's a direct fit. Ordered it off of ebay

TRD Sport Kevlar Leather Shift Knob Automatic For Toyota Hilux Revo SR5 M70 M80
$69.99

 

First thing I did when I picked up the truck was get the beard mod. Haven't looked back since!