1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: 3rd gen Rancho Loaded quickLIFT RS999915 on 285 70 17 Need Suspension Advice Truck Bed Camper Are OME rear shocks long enough for all pro expo's? Shocks for a heavily modded 05 lifted Tacoma? (lots mods) NEED HELP WITH WHAT LIFT TO BUY New Leafs and Bilstein 5100's on the way advice for setting front shocks

Maxtrac Spindle Lift for 2nd Gen Prerunners

Discussion in 'Suspension' started by markmatters, Feb 11, 2012.

Page 532 of 688
  1. Apr 5, 2017 at 12:43 PM
    #10621
    ChadsPride

    #10621
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Thats a good point!
     
    ChadsPride, Apr 5, 2017
    #10621
    HuntTaco[QUOTED] likes this.
  2. Apr 5, 2017 at 4:16 PM
    #10622
    HearnsTaco

    #10622
    HearnsTaco New Member

    Joined:
    Dec 7, 2016
    Member:
    #204300
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2007 White Tacoma PreRunner
    I really want to go with the spindle lift but I just bought 265/65r18 bfg ta ko2s. They are a little over 31 inches, would they look way to small? I've seen some with 265/75r16 and 265/70r17 but I haven't seen any with 18s if anyone has ever had this setup please post pics.
     
    HearnsTaco, Apr 5, 2017
    #10622
    ChadsPride likes this.
  3. Apr 6, 2017 at 8:01 AM
    #10623
    2nd screen name

    #10623
    2nd screen name Tacodelaplaya

    Joined:
    Nov 17, 2015
    Member:
    #169943
    Messages:
    286
    Gender:
    Male
    First Name:
    Bob
    LV/SD
    Vehicle:
    06 AC Sport Prerunner
    Front: Maxtrac, DK heim UCA, 6112 Rear: AP expos, Fox 2.5 RR DSC Fn fivestar with General reds
    Its going to look good no matter what! Make it work
     
    2nd screen name, Apr 6, 2017
    #10623
    ChadsPride[QUOTED] likes this.
  4. Apr 6, 2017 at 8:02 AM
    #10624
    ChadsPride

    #10624
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Heck yeah man! Thank you!!

    What size tires were you running when you had em? did you have glass fenders?

    These babies are going to looking wide af lol
     
    ChadsPride, Apr 6, 2017
    #10624
  5. Apr 6, 2017 at 8:06 AM
    #10625
    Prodigy0325

    #10625
    Prodigy0325 Well-Known Member

    Joined:
    Sep 1, 2011
    Member:
    #62724
    Messages:
    65
    Gender:
    Male
    So Cal
    Vehicle:
    2011 Toyota Tacoma PreRunner
    Maxtrac Spindles, 5100 front and rear, Headstrong 3AAL, KMC XD 301 on Toyo Open Country AT2
    So 'effing stoked...need to get this day over with...meeting up with Marie from @HeadStrong Off-Road to get me parts...
     
    Prodigy0325, Apr 6, 2017
    #10625
    HeadStrong Off-Road and ChadsPride like this.
  6. Apr 6, 2017 at 8:07 AM
    #10626
    ChadsPride

    #10626
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    :woot::woot::woot::woot:​
     
    ChadsPride, Apr 6, 2017
    #10626
    HeadStrong Off-Road and Prodigy0325[QUOTED] like this.
  7. Apr 6, 2017 at 9:06 AM
    #10627
    SpruceTaco

    #10627
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I'll be installing a set of Maxtrac's Saturday. This will make the 7th set I've installed.
     
    SpruceTaco, Apr 6, 2017
    #10627
    Imphedup, HuntTaco, HeadStrong Off-Road and 1 other person like this.
  8. Apr 6, 2017 at 11:03 AM
    #10628
    Imphedup

    #10628
    Imphedup Trout Addict Whitetail Killer

    Joined:
    Sep 8, 2015
    Member:
    #163750
    Messages:
    589
    Gender:
    Male
    First Name:
    CHAD
    LOWELL,MI
    Vehicle:
    2017 DCLB OR

    Down to a dbl deuce per side..
     
    Imphedup, Apr 6, 2017
    #10628
    ChadsPride likes this.
  9. Apr 6, 2017 at 3:44 PM
    #10629
    HearnsTaco

    #10629
    HearnsTaco New Member

    Joined:
    Dec 7, 2016
    Member:
    #204300
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2007 White Tacoma PreRunner
    What is max backspacing on 18s for spindles?
     
    HearnsTaco, Apr 6, 2017
    #10629
    ChadsPride likes this.
  10. Apr 6, 2017 at 8:10 PM
    #10630
    SpruceTaco

    #10630
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Huh? :notsure:
     
    SpruceTaco, Apr 6, 2017
    #10630
    ChadsPride likes this.
  11. Apr 7, 2017 at 8:20 AM
    #10631
    2nd screen name

    #10631
    2nd screen name Tacodelaplaya

    Joined:
    Nov 17, 2015
    Member:
    #169943
    Messages:
    286
    Gender:
    Male
    First Name:
    Bob
    LV/SD
    Vehicle:
    06 AC Sport Prerunner
    Front: Maxtrac, DK heim UCA, 6112 Rear: AP expos, Fox 2.5 RR DSC Fn fivestar with General reds
    285 no glass. I only took them off a few months ago when i got a second set of fivestars with less offset
     
    2nd screen name, Apr 7, 2017
    #10631
    ChadsPride[QUOTED] likes this.
  12. Apr 7, 2017 at 8:30 AM
    #10632
    ChadsPride

    #10632
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    You've got me worried man!

    What are yall using to trim the actual plastic of the fender flare?
     
    ChadsPride, Apr 7, 2017
    #10632
  13. Apr 7, 2017 at 12:28 PM
    #10633
    HuntTaco

    #10633
    HuntTaco Well-Known Member

    Joined:
    Jun 29, 2016
    Member:
    #190814
    Messages:
    156
    Gender:
    Male
    First Name:
    Derek
    Chesapeake, VA
    Vehicle:
    2013 MGM Prerunner
    Maxtrac 4" kit Bilstein 5100's Mastercraft 305/70/16
    Gypsy tears
     
    HuntTaco, Apr 7, 2017
    #10633
    ChadsPride[QUOTED] likes this.
  14. Apr 7, 2017 at 12:28 PM
    #10634
    ChadsPride

    #10634
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Link?
     
    ChadsPride, Apr 7, 2017
    #10634
    HuntTaco[QUOTED] likes this.
  15. Apr 7, 2017 at 12:38 PM
    #10635
    brandonlamb25

    #10635
    brandonlamb25 Well-Known Member

    Joined:
    May 25, 2008
    Member:
    #6871
    Messages:
    351
    Gender:
    Male
    Georgia
    Vehicle:
    08 Crewcab Prerunner V6
    K&N Intake, Wet Okole Seat Covers, Ipod to Factory radio hookup kit, Black Low Pro Toolbox, Toytec Coilovers and 285/75r16 BFG MT's
    I have a question to those that are far wiser than I. I installed my maxtrac 4" spindles yesterday on my 2008 DC. Install went relatively smooth. Got it all done. I chose to reinstall the OEM coiler/struts as i prefer the smoother ride of those over the adjustable toytec coilovers with 5100 Bilsteins that I was removing. So told I took it to the local Toyota Stealership to get my tires rotated, road force balanced and aligned. I got tow outta three. They claimed they couldn't align it. Said they tried for three hours but couldn't do it. recommended I let them take it to the body shop and pull the frame. I said F no. I'm the only owner of the truck and I've never had an accident (knock on wood). So leaving the dealership I realized that the alignment seemed worse. when traveling straight dow the road my steering wheel is now pointed to the two o clock position. Pretty bad off. Is this normal? I've never heard of this before, unable to align a vehicle. I took it to another mechanic whom years ago installed a 6" trail master lift on my 98 2-door Tahoe which rode like a dream. He looked it over and said it shouldn't be a problem. Anyone else had similar issues? Ever heard of such? Thanks in advance.
     
    brandonlamb25, Apr 7, 2017
    #10635
    ChadsPride likes this.
  16. Apr 7, 2017 at 12:39 PM
    #10636
    ChadsPride

    #10636
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Take it to NTB - I've had really good luck there

    The guy that does mine does lifted vehicles all the time

    Perfect alignments every time

    Factory UCA's
     
    ChadsPride, Apr 7, 2017
    #10636
  17. Apr 7, 2017 at 12:46 PM
    #10637
    brandonlamb25

    #10637
    brandonlamb25 Well-Known Member

    Joined:
    May 25, 2008
    Member:
    #6871
    Messages:
    351
    Gender:
    Male
    Georgia
    Vehicle:
    08 Crewcab Prerunner V6
    K&N Intake, Wet Okole Seat Covers, Ipod to Factory radio hookup kit, Black Low Pro Toolbox, Toytec Coilovers and 285/75r16 BFG MT's
    I wish we had a NTB. No such luck in my south Georgia small town of Valdosta. We have a Kaufmann's Tire, Goodyear and a Firestone dealer/shop. Those are the only chain locations I can recall ATM. The tires are BFG's MT KM2. First set of KM2's. Hate them compared to the multiple sets of KM1's I had.
     
    brandonlamb25, Apr 7, 2017
    #10637
    ChadsPride likes this.
  18. Apr 7, 2017 at 12:48 PM
    #10638
    ChadsPride

    #10638
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Dang it man, try somewhere else besides the dealer.

    Ive never heard of not being able to get an alignment because of the frame....not like Im an expert. Js
     
    ChadsPride, Apr 7, 2017
    #10638
  19. Apr 7, 2017 at 12:52 PM
    #10639
    brandonlamb25

    #10639
    brandonlamb25 Well-Known Member

    Joined:
    May 25, 2008
    Member:
    #6871
    Messages:
    351
    Gender:
    Male
    Georgia
    Vehicle:
    08 Crewcab Prerunner V6
    K&N Intake, Wet Okole Seat Covers, Ipod to Factory radio hookup kit, Black Low Pro Toolbox, Toytec Coilovers and 285/75r16 BFG MT's
    He either. We will see come Monday when I drop it off at the mechanic who specializes in lifts.
     
    brandonlamb25, Apr 7, 2017
    #10639
    ChadsPride[QUOTED] likes this.
  20. Apr 7, 2017 at 12:54 PM
    #10640
    ChadsPride

    #10640
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Best of luck to you man! Did he give you a more specific reason why he couldnt do it?
     
    ChadsPride, Apr 7, 2017
    #10640
Page 532 of 688
To Top