MARYLAND TACOMAS

or else everbuddie has me on ignore

 

that wouldn't be an entirely too difficult part to build with steel plate, but there's no way an outfit like mobtown, or me in my garage could do it for anywhere near the price of the one you found online.

we'd have to either tack weld the two pieces together or epoxy it back together. then you build a jig that captures the location of each bolt hole. then you note your dimensional limits (if you over build, will it hit/interfere with anything), and then you start cutting, welding, and drilling. if you have to build a jig for something, you need to sell either a lot of them, or sell them at a pretty substantial price to make it worth the setup time.

 

yeah. After seeing the setup mobtown has for running sliders and the recovery bars i fully understand that one off stuff is near impossible to make a decent profit on, just because of the setup time alone.

 

If we have any computer nerds in the MD thread, I'm selling my graphics cards and there is probably more stuff on the way:

https://www.tacomaworld.com/threads/wts-2-x-msi-280x-graphics-cards.484837/

 

@68dave when you replace your end links on the T4r order 95 rears for the front and rear they are longer .I couldn't remember if I gave you this info when you asked

 

Ok so got my alignment done today at Appalachian Offroad in Westminster. Great guys, great work. They got my 1* caster 0 camber 0 toe lifted 3" on stock uppers and lowers, couldn't pull any more out of it. Tires now rub the inner lower edge of my front bumper when turning hard in reverse. Is what it is, I'll trim it. Charged only $80 and I threw him $20 tip so for $100 in very happy. Highly recommend you guys go there if you want someone trustworthy to do it right the first time. Truck rides great, no bump steer, no pulling at all.

 

Didn't have enough time to get out to somewhere good, so I stopped at merchants in glen burnie. Guy was good, had a lift on his truck as well. Got my specs all good and I'm a happy camper. Went to three places that gave me fits about having a lift

 

Yeah I had one place quote me $89 and then say oh it's lifted, now it's $129 OK whatever lol

 

They do the same thing any way but they use the excuse of a lift to charge more. No good!

 

Thank you guys for keeping me entertained while I've been at this crash site!

 

I was there today to drop off stuff for my guys

 

Yeah they have been great too work with!

 

I tried going down the power lines that our Humvees got stuck down but the gate was locked. We had guys under tarps out there in the pouring rain.

 

You guys need to give more detail lol. Crash site? Aliens?

 

What time were you here?

 

Illegal Aliens maybe

 

They should all crash once and for all

 

It was around noon. EOD showed as we were walking out

 

They just finished up at 1630
I must have just missed you