3rd Gen Maxtrac Spindles

Yes!!!

 

Thanks man!

 

Bora makes a .75 spacer that would work and even out your front and rear

 

I would love to run maxtrac and Bilstein set at O but only want to run 265/75/16 or 265/70/17 , due to my work commute, has anyone seen a 3rd gen with similar setup, I found some 2nd gens but body style looks so different in my opinion it's hard for me to get an idea of how it looks. @zachgara4 what tire / wheel set up do you have ?

 

finally ordered a set of spindles!


wheels
maxtracs
next all the parts bilsteins, speacers aal
then tires!

 

Any other 3rd gens in here spindled?? Just did mine few weeks ago

 

what lift in rear, and what size tires?

 

1.5 inch in rear and 33s. Your basic 285/70/17s

 

based on others, should need 2" or more rear lift . Is your front much higher than rear ?

 

A little nose high but not very noticeable

 

truck looks great. Would love to see some more photos / angles if you get a chance to post more photos.

 

santa in brown shorts came this evening

 

​

 

Truck isn't very photogenic haha

 

that moment when your finally ready to order all the parts for your lift....and headstrong is shut down for 2 weeks while they move

 

Hi Guys, I'm planning to get Maxtrac 4" with Bilstein 6112 front and 5100 back. Is this a good setup? Do I even need 6112? No off roading and this is my DD. Any other recommendation with Maxtrac would be appreciated.

I want to fit 285 70 17. It probably been ask a thousand time but would this setup avoid trimming for 285 (Just thinking somehow the Maxtracs would accomplished this) or should I just go 275 assuming that's guarantee to be no trimming?

 

to my knowledge (limited tho it may be) you'd be fine with 285's and with the spindles as for the bilsteins id save the dough on the 6112 and go with the 5100 adj set to 0. thats my plan. and use the savings to get a dakar set for the rear lift as opposed to blocks or a single aal. great look and smooth ride with the combo of 5100 and dakar leaf set.

 

how many likes would a chadspride like if a chadspride could like this

 

Just the answer I was looking for! 285 here I come!

Now some more questions, I read that dakar are a rough ride if you don't haul things? Is this correct or will the bilsteins offset that? If yes, any recommendation on the dakar leaf set?

Here's my future shopping list so far: Maxtracs 4", 5100 front and back, and a dakar leaf set. Google shows me OME, 2" and 2.75" I'm assuming 2" will be good since the back ride high. Am I missing anything else?

Thanks TacoTuesday91!