What Have You Done To Your 3rd Gen Today?

I fixed some damage to my back fender today. Sanded out the scratches as much as I could, masked them off and sprayed Rustoleum Bed Liner and knocked down the texture with 400 grit. Came out way better than expected.

 

Nice work !

 

5100s on the front.
gettin ready to dos the back after I have a beer or 3.

 

DB Customz grille

 

Just ordered the same ones. Do you get any wind noise from them?

 

You will have to let's us know. Mine are still 3 weeks out !

 

Ski rack

 

Replace grill and bedside decals, added decal to tailgate today!

 

What soft canopy you running? I am kicking the idea around. Is it easy to take on and off?

 

Yeah I laid out the top piece for the mat to get the placement right. Then i marked where the hole was in the mat for the bottom piece to come up. I started with a much smaller hole than I ended up needing but after it was started I put the bottom mat piece under the mat to see exactly how big of a hole to cut. It was fairly intuitive once I got going but start with a small hole. You can always cut it bigger, you can't put it back after it's too late haha. There is some room for error though because of how the pieces clip onto the mat. Total it took me about 10 minutes to make the passenger floor mat look like it should have from the factory. You will be so happy you did this once they are on.

 

Got a new cheetah print pollen wrap. Fortunately comes off with soap and water

 

I would just throw a clear coat over it as it sits. That looks sick.

 

Better check your cabin filter right after the pollen is done. Hasn't started here yet

 

Did a CMC, flattened pinch welds, used a heat gun to mold liner, and trimmed a few pieces of plastic. No rubbing now. My caster is 3.3.

Before cmc


After

 

5100s and Dakars are on. Pics Tomorrow.

 

Installed a switchpro and a few Baja Designs goodies on my buddies TRD Pro Tundra today.

Took some pics post install just for the hell of it

 

LMAO!!! sorry dude but yea thats upside down!!!

 

That is the wrong shock for our Truck lol

 

Installed @RelentlessFab dual quick fist and hi-lift mounts to hold a 60" hi-lift with daystar handle isolator (cut to 55" to fit under my low-profile tonneau cover), 40" shovel, and 26" axe. I also painted the tools to match my blazing blue pearl truck because I'm a crazy person. Lastly, I installed some additional d-rings in the bed to hold smaller items (gas cans, propane tanks, tool boxes, etc). Thanks to @Pistol Pete for the great idea on the d-rings. More pictures and instructions are in my write-ups for the tool mounts here and d-rings here.

 

Plasti dipped the rims, grill and rear chrome bumper caps. Took out the rear v6 badge and put in a TRD badge and added a TRD badge to the front grill. Put on the weather tech wind deflectors from the group buy.