What Have You Done To Your 3rd Gen Today?

Driver 3 / Passenger 2, but might go 4/3 down the road. I had it set at 4/3, but just before installing I had the 2nd gen 6112 settings on mind and set it at 3/2 instead. I want to keep some rake for when I have my bed loaded. Right now, with the truck static the driver's side looks close to level while the passenger's side is just slightly higher than stock.

 

Got like 1 centimeter of air today bro

 

I will know tomorrow. 26 mile ride in to work. I was out of town over the weekend and my wife picked it up for me.

 

This was the video I had used as a guide for mine. It worked fairly well. No need for soapy water or heat gun.

 

Thanks for the suggestion. The paint is just on the verge of breaking so I have been mostly staring at it more than anything- wondering how fricking dumb I must be.

 

Don't be so modest. As a seasoned machinist I would say more like 1.7 centimeters.

 

This will do until the wife allows me to get Pro grill...

 

Found a big weiner with my taco.

 

It definitely looks like you're out of the drivers seat - that must be accounted for in your big air equation.

 

We have The DingMan locally. I will pay him a visit before I attempted doing anything on my own. Thanks for the idea.

 

Decided to try TRD 16 inch beadlock style. These duratracs are noisy. Not sure why people say they're quiet.

 

You running separate relays for the lights, or all through the Switch Pro. Looks clean!

 

Does anyone have any experience with the switch pro sp-8100? Contemplating this addition and looking for ideas as to placement and how straightforward installation is.

 

This setup is all through the switchpro. On mine I had to run a micro relay for my OntX6 hi power because it was overpowering the switchpro circuitry.. And thank you. I spent the better part of the day custom making all of the harnesses and carefully routing everything so that it's be a clean install for him.

 

I have one personally and installed one yesterday for a friend. Check out my build thread for details on mine. Pretty easy install if you are reasonably good with wiring and electronics

 

Did my CMC... Looks every bit as good as stock but did require some hardcore grinding...

 

3 to 5 days I had my order

 

When I was a kid we had an 82 Ford station wagon that was carbureted. It had the old round style air cleaner on top of the engine that was held down by a wing bolt. One day my dad was working on the car and thought he was done. When he closed the hood the dent sticking up right in the middle of the hood told him that he forgot to tighten the wing bolt down. That dent stayed there for the next 15 years until they sold of the car.

 

No, the shovel wasn't. It was in the camping area at Wally World. https://www.walmart.com/ip/24-Compa...ategy=PWVUB&visitor_id=fWIYBUQWU-tNCqBjPs8Luo