3rd gen 285/75/16 16x8 wheel 4.5 BS 0 Offset on stock suspension

Giving that the 3rd gen has more ground clearance than the 2nd gens, does this mean I can fit 285's with little to no problem (rubbing mainly)?

I currently have 265/75/16 bfg's with procomp 7032 16x8 4.5 backspace and 0 offset. Exact same set up that I had on my 2014 but the wheels and tires look smaller on my new 3rd gen. They did look bigger on my 2014, now they look like 245's hence the question.

Point blank I want beefier tires without having to spend money on lifts and leveling kits. I'm very good with stock suspension.

Anyone out there tried 285's with this kind of wheel specs and experienced no rubbing? Again the wheels are 16x8 with 4.5 backspace and 0 offset. Thanks in advance!

 

@dsmdylan 's (rear is lifted in this pic, front is not). Very little rubbing on full lock and only on the fender liners.

 

@c4lvinnn What are you running for offset? 0 like the thread title?

I keep bouncing between 265s, 275/70s, and 285s.

 

That's not mine - but yes, those wheels are 16x8 ET0 (4.5BS). 285/75/16.

 

Thanks, man.

 

I ran this set up for a day before I lifted. It fits without rubbing. But don't leave the pavement.

 

Thanks man!

 

Self-Bump

 

i would wonder if the cab mount chop would be needed.... hence the reason im not running that size tire. I dont wanna do a CMC.