Goodyear Duratrac 265/70/17 + XD Revolvers fit 2010 Stock TRD Tacoma?

Will Goodyear Duratrac 265/70/17 + 17x9 XD Revolvers fit 2010 Stock TRD Tacoma? I was all set to get my stock Tacoma rims powdercoated and the set wheels that I was going to borrow in the meantime didn't fit. So that ruined my whole plan and I'm giving up because it's just becoming a hassle. So I think I'm going to settle with the 17x9 XD revolvers. I don't have my 5100s yet but will when DSM gets some more in. So with the Duratracs and Revolvers on my Stock setup will there be any rubbing issues or anything I should worry about. I was reading another thread regarding the revolvers of some offset issue. I don't know if that person was getting bigger tires than I am or not. Anyhow 4 wheel parts said they will fit, but I wanted to ask here for confirmation. The other thread also mentioned spacers? Is that needed here with my application? Thanks!

 

It depends on the backspacing of the wheel. 4.5 and should be good. you may have to temporarily remove the front flaps until you get the bilsteins in.

 

265/70s will fit with stock height with no rubbing.

 

Get 4.5 bs and u should be fine. Check my setup out in my gallery. I got revolvers 17x9 with 285/70/17 and 2.5" lift

 

Well I just completed the transaction with 4 wheels part. He didn't mention backspacing. But I placed the order with the duratrac tires in 265/70/17 and XD revolvers and mention my 2010 Tacoma TRD stock. So I'm assuming the person knew the correct specs. Can't wait to get them!

 

Ummm...never assume! Ask them for the backspacing to make sure and then when you get the wheels, test fit on your truck and then get the tires mounted.

 

They're doing all that, it's being shipped to my local 4 wheels part and they're doing the mount and balancing and install. So if it's wrong it's all on them.

 

How did this work out, venomized? Any rubbing problems? I've been wanting to get the 17" revolvers in bronze but don't want to have to lift my truck.

 

Nice set up man! That's the best wheel and tire set up I've every seen!