What Have You Done To Your 3rd Gen Today?

I would be cautious of that badge on steering wheel. Don't want that shit flying in your face if you get in an accident

 

Mine worked great

 

Installed my AVS Bug Shield after a wash. Had a chip in the hood with under 5k miles and fixed with a DupliColor pen/brush and a touch of wax after a wet sand.

 

You need to start a thread on this. Where did you get the CAD info from?

 

Stopped and looked at snugtop GB sport in inferno today...... they don't make them for the long bed yet .....

 

How you liking the kings?

 

I'll probably remove mine since they pretty much snap in and out of place.
https://www.tacomaworld.com/threads/door-scuff-plate-removal.418196/

 

That looks sweet!

 

Worked perfect. Thanks for the help!

 

OH BOY OH BOY OH BOY @Mobtown Offroad

 

Where is the pretty crate that the parts were shipped in?

 

Definitely would not fit in my short bed so the nice gentlemen at the loading dock helped me take it all apart. Also, Phillips AND torx screws? Damn it guys.

I do have the little box of other supplies though, don't worry.

 

Thanks
Hope this help
It's on the passenger side by the firewall

View from drivers side


Still a lot to do with very little time
Need to do the wiring and need to plumb the lines,
I'll have 1 outlet in the bed and 1 on the compressor

 

I know, I know. We built it to fit between the fenders long ways so all you have to do is keep the tailgate down and strap it around the back of the crate, tight against the front of the bed. You are the first person to take the stuff out lol, which is why I wasn't concerned about the screws. The torx are the long screws for making sure it stays together and the phillips are cheap ones that just kind of hold items in place.

 

No problem. Glad it worked out for you.

 

Yeah, I think it would have fit widthwise after eyeballing it, but to load it would have been difficult as it was up at the loading dock level and try as I might my truck is not quite that tall.

No worries man, it took a quick 5 minutes! Going to get it epoxied this weekend and mounted up! I'll post some pics when it's all finished.

 

I have only have had them on for the weekend but so far so good
I want to go off-roading somewhere soon for I can see what I paid for but it will probably be about 2 weeks or so until I'm able to do that

 

It's all about the little things. TUNAGE !! Gotta help a little bit. Next: blown tweeters ?

 

Purchased a 1995 Ford 7ft bed, made into a trailer. Loaded roughly 1500 pounds or more of rock and filled it up with wood. Helped the Alaskin State Troopers Pull out a Grand Cherokee from a ditch and ended the day with a fire built from the materials we gathered. The trailer is going to be my future Overland trailer.

 

I have custom ones for the lower doors made. Might try to install myself this weekend or have a local shop do it. I'm not great with stickers. I'll post when it's done