Clazzio leather seat covers!

Uh..I will measure tomorrow. Too dark outside now.

They feel quite a bit more comfortable to me now. Well worth the cost.

 

Can someone please give me very detailed instructions on the backseat seatbelt. I'm not clear on it. I unbolted the belt. Now what. The way I have it seems like it would tear the seat cover at the top within time. I don't think I have it right. Thanks

 

Take the belt end that you unbolted and run it up inside the rear cover so it comes out up top through the large hole for the seatbelt....back down the front outside of the back seat...through the fabric loop near bottom of cover and bolt it back into place.

 

Thanks rooster. I think I originally did it that way but it felt too tight. So I tried it another way that's apparently wrong.lol
I'll give it another shot. Thanks again

 

Gosh, my fingers are sore! These thing are tight. I'm really happy with this product. My previous Taco had leather, which I later found out was Katzkin. My initial thoughts comparing both, there is not much of a difference fit & feel in all honestly. Other than the back seat covers go over the plastic back rest. Also, these do feel more cushy & comfy. Not to mention price and no need for upholstery shop. Glad I didn't wait too long jumping on these, it really transformed the Taco.

I do have a couple of questions.
1) Front seat bottoms, what y'all do with the strings?
2) Rear back seat latches, did anyone tuck these under the plastic like all the other ones?

 

Installed my new custom blk/grey/blue. Best mod for the money in my opinion. Grey is darker than it appears

 

That is the exact set I have on order and with the embroidery. It looks great!!

 

Ya it does. Very happy with them.

 

Hey rooster, one more question if you will. There is a hole on the bottom of the same seatcover near the seatbelt in question. Does the seatbelt you unbolt go through there on the way up.just want to make sure. Thanks

 

No....ignore that. The hole is so you can access that little bar/anchor point for a baby seat.

 

Cool,thanks rooster,I will give it shot tomorrow

 

Any pics of quicksand type covers?

 

Love mine! Hands down the best upgrade to my truck yet!

 

Dk gray x3. I pulled the seats to secure the straps after pulling them. There is still some looseness in the sides of the back. Hopefully it goes away. I'll hold my other thoughts until I get to know them a little more.

 

If you are considering these covers don't hesitate! Completely changed the inside of the truck. Plus nothing beats the smell of leather in a car.

A few tips that may help some users:

Removing this screw on the back inside of the front seats helped me get the string through much easier.


I also used some zip ties and electrical tape to secure the excess string and straps on the underside of the rear seats.

 

The completed look.



Also loving the @Clazzio floor mats. Perfect combo. The seat covers and floor mats arrived less than 48 hours after I ordered them.

 

Hey rooster, your tips and pictures really helped on the seatbelt part. I just have back headrests left. Thanks again

 

Nice job EPH. they look smooth.

 

Thanks! It took me forever but I just took my time so it came out perfect.

 

Here's a few more pics of the Clazzio's in my truck...