spc light racing upper control arm help

Just noticed you never mentioned your tire size and what wheels you're running, and the specs on those wheels.

 

265/75/16 on TRD beadlock wheels

 

Looks like I'm a little late but good info in the OP here

https://www.tacomaworld.com/threads...driving-report-with-light-racing-ucas.158795/

 

Do you still have your front mudflaps on?

 

Yeah OK your telling me to go less and other people are telling me to go more,, whatever

 

Yeah , the goofball at the dealer said he can trim them to get rid of the rubbing, so I said go ahead and do it. He trimmed everything but where it was rubbing,, lmfao

 

Aha, he doesn't know what he's talking about. I guarantee you you're rubbing on the mud flaps, and the part you're rubbing on can't be trimmed. Remove those and the mini mud flaps in front of the tires, and you should stop rubbing.

 

Calm your tits

He's saying if your lower adjustments aren't already maxed out on caster you can take away caster at the UPPER and raise it at the LOWER to gain more clearance. This is only if your lowers aren't already maxed out.

 

Yeah it's rubbing on the part that can't be trimmed. The front minis are off, no big deal I will drive it as is , screw it

 

Actually if you starting using the LR's for 3+ degrees of caster your actually moving the wheel towards the cab mount. You need all the caster you can out of the lowers past 2 degrees up top.

 

265/75/16 TRD BEADLOCKS. THE GUY AT THE SERVICE dept said my tires are not the right size for the truck that's why it's rubbing. Lmao,, yeah no shit thats why I put a lift on it and am doing all this stuff so I can run larger tires ,,, wtf

 

^^^^^^^

 

Ooooh it can be trimmed

 

It cost me 130 dollars for the alignment which basically accomplished nothing as to getting the tire more forward. It probably made it worse.. anyone want to.buy a nice set of rims and new tires ? I'm putting the factory stuff back on lol

 

Start a BST thread

If you want some good info on how to adjust the LR UCAs read the OP of that thread

and your wheel specs are causing the rub not the tire size

 

So your saying that the TRD beadlock rims are causing the rubbing on my truck then ? Come on guy

 

Come on what ?

The TRD beadlock wheels have a different backspace than the stock Offroad alloys correct ?

 

FYI you can run 265/75/16 tires on stock wheels at stock height with no rub

Good luck with your issue OP

 

https://www.tacomaworld.com/threads...driving-report-with-light-racing-ucas.158795/

That should do ya!

 

They do but from the same experience 2yrs ago. I ran billies at 1.75 on offroad springs and never rubbed a thing wheeling( on the trd fake beads w 265/75's). Untrimmed. Every truck is different.