JD's '02 Tacoma Build

Not much to see but finished the rear housing and put the axles in to test... no warpage!! also mounted the front lowers on the frame and started the upper mounts on the frame. Now I just need shock mounts, fuel, brakes, brake lines with proportioning valve in the cab, spare tire and jack mounts, paint... just a few things then on to the front!

 

Upper/lower links and mounts done, carrier bearing mount done







Did a little flexing, full bump to full droop with no binding, at the axle ends it measured over 30" difference

 

Looks great!

What size CO you going to run? 16s?

 

14" coilover and 16" bypass, that will give me 24" of travel, probably bump and strap just a little shy of that

 

Moving right along man! Can't wait for another ride while drinking HULK JUICE!

 

Yes!! Thanks man

Haha thanks, I really have no idea what I'm doing

 

just weld that shit and call it good lol

 

Brake controller in the center console. Brake lines are routed from the master cylinder back to the axle, just need to hookup the calipers

[/URL]

 

clean as hell man!!!

 

Thanks man, perfect little space for it

 

ive lost motivation to work on my truck. need to get welded shafts for my bypasses to fit em by the booster. so i may need your help in a month or so when i get em

 

For sure, let me know. My truck might be on its wheels by then, only to go back on jackstands for the front lol

 

you decide what your doin?

 

I'm really interested to see how you do this. Are you planing on keeping all the smog stuff?

 

Yes sir. I need to trim these down a lot more but everything cut from the stock tank so it will all use original gaskets and mounts. Fingers crossed but me reason it shouldn't run just like normal

[/URL]

 

Pretty much, was surprised nobody caught that wheel is sitting on a different hub...

 

Solo?

 

let me get that MCM kit lol

 

4400 and ill ship it