FWP Fabrication Aluminum Bed Rail Mounts

Do you have stuff bouncing around in the back of your taco that you wish you could mount to the side of your bed? It sounds like a first world problem, but I may have a solution....

Roto Pax Mouts




These are CNC plasma cut from 1/8" aluminum, so they will never rust, and can be used to mount your Roto Pax tanks to the head rail of your truck. They are not predrilled so you you can chose the desired height.
Click Here for Roto Pax Mounts

Universal Bed Rail Mounts

These are CNC plasma cut from 1/8" aluminum, so they will never rust, and can be customized to hold quick fists for a shovel/axe setup, bike fork mounts for transporting your bike, water ports, rotopax cans, hi-lift jack + shovel, or use them as drop mounts to mount items under a bed cover, etc. Hardware is for mounting the brackets to your bed rail. If you are interested send me a PM and I can get you set up.
Click Here for Universal Mounts
https://youtu.be/8z_SQoUJUUY

Hi-lift Bed Rail Mounts​

These are CNC plasma cut from 1/8" aluminum, so they will never rust, made specifically for mounting your hi-lift style jack to your taco's bed rail. A cutout has been added to allow a lock to be passed through the hi-lift and the mount to deter theft. Hardware will include everything needed to mount your hi-lift to the mounts and the mounts to your bed rail! If you are interested send me a PM and I can get you set up.
Click Here for Hi-Lift Mounts
https://www.youtube.com/watch?v=9I-38Lcy0-w&t=7s

CB Antenna /Whip Flag / LED Pod Tab Mounts

These are CNC plasma cut from 1/8" aluminum, so they will never rust, and can be used to mount your CB antenna, Desert safety flag, light up whips, or led pods to your bed rails. Photo examples of use have been added below.
Click Here for Tabs
https://youtu.be/syW47ADiJL4

Patches

We have patches too! 3.5" x 4" Show your support with a FWP Fab V1 patch! They are velcro backed and ready to stick to your gear! Or your headliner, because that looks cool too!
These are limited edition, only 100 made so get yours while you can! New patch designs will drop out when these are sold out!
Click here for Patches!

Stickers

We have stickers too! I decided to mix it up and do a colored patch but B&W stickers! I couldn't decide which one i liked more so i went with both!
Click here for stickers

Visit my website @
fwpfab.com
Shipping will be through USPS priority mail, typically 3-5 day lead time and 2 - 3 days shipping.


​

• 
  

 

Customer Photos!​

Universal and Hi-Lift mounts under a bed cover!

Universal and Hi-Lift mounts under a bed cover!

Universal mounts holding a hi-lift and shovel!

Universal mounts used to mount those bike forks a little lower!

Universal mounts and quickfists holding a waterport!

Customer send this awesome photo with quick fists attached!

Water port mounts! This one is custom built but works with the waterport brand also.

Hi-Lift mouts on the head rail with 48" lift

Hi-Lift mounts under a bakflip!

Rail Tab used for CB antenna

Rail Tab flipped to use as a light pod mount

Just sticks up over the bed sides.

Hi-Lift mounts in a shell

Universal mounts with quick fists in a shell
Universal mounts holding a rotopax

Hockey Stick holder....

Universal mounts holding traction boards!

 

Just to be clear, the brackets only are offered? No mounting hardware for attaching the brackets to the bed rail?

 

Also you can't have 3+ sales threads for the same item. Pick a subforum that best fits, post it there.


You can't post in all of them.

 

Just curious, why the price rise?

Guess I snoozed too long.

 

You can still get them for $30 shipped, that is still the original price. I just had to get a little more out of the paint and mounting hardware, plus the time it takes to paint each set....

 

I sent you a PM.

 

Sweet!!!! I replied to your PM. can you make sure that i have your correct address before i ship?

 

Hell, for $40, I'll take a set all painted and ready to go with hardware!

 

op, how long are the brackets? i'm thinking these may be good to mount Rotopax to the bed. 3-gal Rotopax are 16" wide so the meat of a Rotopax mount would have to be at least 8." from the mounting holes on the top of your brackets. The bracket would then have to extend down about another 3" to support the Rotopax mount so it would need extend about 11" from the mounting holes to make this work. it looks like they may be a few inches short but i hope i'm wrong.

$45 Rotopax DLX Pack Mount

https://www.amazon.com/RotopaX-RX-DLX-PM-Deluxe-Pack-Mount/dp/B008S9QQ6C

 

Yeah probably... What do you think.. 3" wide x 11" long w/ a 1" bend??

 

yea, a few inches short. doh!

Rotopax plates are 14" long but they are flush mounted to the rail so the fuel container can go above the hardware attaching the plate to the truck. I reckon your mounts could work to mount these overpriced fuel cans with flush mounted hardware.

$40 RotopaX RX-TN Toyota and Nissan Truck Plate

https://www.amazon.com/RotopaX-RX-T...008S9QSJM/ref=cm_cr_arp_d_product_top?ie=UTF8

 

So are you concerned about keeping the gas tanks below the bed rails? I think these would work now but the tanks would stick out above the bed.

 

Awesome! Post up some pics when you get them mounted!

 

Does anyone else have any pictures of these brackets mounted up? I would like to see how they turned out for other people.

 

i was thinking about mounting on the back of the bed. my rack uses the entire bedside rails so they are not available. below the rail would be best for anything mounted but sticking up a bit would not be a problem.

 

Ok cool. I will see what i can come up with. I have a couple people that live close and have rotopax so i am going to see if i can use their stuff to come up with something.

 

I would like a set painted w/ hardware if still available.....thanks!

 

I have several pair ready to be sold! Check your PMs.

 

Customer photos! Hi-lift mounts and quickfist mounts, and they both fit under the bed cover! Turned out awesome!