BHLM Odd Scenario

I will be starting the BHLM this weekend and need some specific advice on how to go about it. I had attempt removing the headlight lens (only one of the headlights) once before and only got it partially removed and stopped. I sealed the light with 3m window weld. Can I still bake the light with 3m window weld?

Thanks!

 

Preheat to 350°, use butter not margarine and let bake for 20 minutes. Remove from oven and let stand for a half hour before serving.

 

Thank you, Rachel Ray!

 

That's Guy Savoy to you buddy

 

@mesojdm hes the retrofit headlight guru, hopefully he has some insight.
I believe his numbers were quite lower than posted above.

 

I was totally joking (hence the butter and serving reference.) His headlights would be completely trash if he went by my numbers lol.

 

Yeah I know. The highest number I've seen (hopefully I can remember this right) was 310° for 10 minutes. I am not dumb enough to butter my lights.

 

I was just going with it, i think its around 210 for 6-8 minutes then pry gently, redo over and over till they pop off, take your time do not rush.

 

https://www.tacomaworld.com/threads/3rd-gen-bhlm-retrofit-projector.429820/

Correction^^