What Have You Done To Your 2nd Gen Tacoma Today?

Thanks Jamie for the Love!

 

In my experience, axle wrap on a second gen is caused by a bad driveline angle. At least It was for me. I had the big kachunk at take off and the bad vibrations while accelerating hard. All gone now.

 

Door striker Trim covers and Door Stop mount covers installed.

 

Where were the tires rubbing with the 0 off set?
What is the offset of the current wheels?

Looks good btw

 

I get a slight shudder/vibe when stomping it from dead stop, and at about 45 mph almost always on the same road i get this weird feeling from the truck but i think its the road. Its hard to explain lol kinda like a weird whole truck hopping thing. @zakk123456 do you ever feel like your truck is hopping on blanding?

 

On the road mine isn't too bad. From a stop I get a lot of wrap and rear wheel hop if I floor it, but I very rarely do that anyway. What drives me friggin nuts is that hop when I'm wheeling. Especially when I'm plowing through snow it hop hop hops like a bunny and is unbearable

 

With 285's it rubbed the paint off the UCA's and would not turn past half because the tires hit the front UCA's with 0 offset, New moto metals are -24 offset. Need to flex it and start cutting next.

 

Debating my options for the rear bumper, leave it be, black it out, or color match. Opinions?


Don't mind my shitty parking

 

Black gets my vote

 

Might as well do the steps while your at it!

 

Anytime man!!

 

Haha yeah it's a cascading effect, bumper, steps, tinted tail lights, blacked out headlights.... my wallet is already feeling lighter

 

color match looks so damn good. trying to find one for mine. tired of chrome

 

I vote high clearance plate, painted black of course

 

x2 af​

 

Like the door striker trim covers and door hinge mount covers.
Where did you get them from, I would like to order a set for my truck.

 

What lift do you have?

I just picked up some 18x9 0 offset and have 285/65r18 Mastercraft MXT and I am now worried they will rub.

 

Realized my passenger side door is so rickety because the idiot PO reinstalled it missing one bolt from each hinge. Anyone know what size bolts the threads that attach the hinge assembly to the door itself are?

EDIT: First on page 6000

 

I had same question and seen them below in a list of parts talked about on this thread. Don't know if you have that feature or not. But here you go just in case http://www.ebay.com/itm/4-Car-Door-...Toyota-Camry-Corolla-/381768961386?rmvSB=true