What Have You Done To Your 2nd Gen Tacoma Today?

I've certainly seen worse.

 

I use to drive a lifted diesel 100 mile a,day to work trust me to me 16 is a dream

 

I've never kept a vehicle with over over 75k, took me 6 years to get that many miles on them. I always get bored with what I have and update to a new truck. My current truck may be the exception because I don't like the looks of the 3rd gen. My father has a 2016, 2wd with 4 cyl with automatic 6 speed and here in the mountains it constantly changing gears because it doesn't know what gear it wants to be in. The interior is nice but the front end is just to fugly for me to own one for quite a while. Sorry I got of track, back to more important post than this one.

 

Finally got the Dometic fridge mounted on the slider. I wanted a way to quickly remove the slider, so I used well nuts that compress on the back side when tightened down. I'm amazed at how strong they are; this thing wont budge! The cooler is staying chilled easily at 39 degrees, even in the back of my truck in the sun, with the compressor barely kicking on. Voltage is holding nicely at 12.5v for over 5 hours now.

 

I still have my lifted 3rd gen 4runner. 280k miles and counting. I find pride in keeping it going and owning all the jeeps on the trail.

 

Where did you tie into constant power? I like I'm about to do the same thing

 

Please explain I'm running the same size ties I believe 255/80/17 and haven't recalibratedanything how is this done pleas?
NEVER mind I read further

 

You can pay to get it recalibrated or buy a recalibrator or do math camp.

 

made a gif

 

thanks it's only off by 3mph I don't care as uh about mpg's as much as with the automatic if it's affecting shift points but I doubt it

 

Looks like a Lego movie!

 

Just need some new retros

 

I wish!

 

Shit probably jimbo or acerwin goin get it, or spruce cheating on ig lol

 

It's okay tho. On Oahu, we have a yearly safety inspection, and the truck won't pass with retros or HIDs, so if the inspector notices them, I would have to swap them out every year. And since the plate bumper has full hoops, I'd probably have to pull the bumper off to remove them.

 

Dipped or vynal?

 

That truck is broken. The instructions said to put the intercooler in with the supercharger.

 

Mines installed the same way. Does yours find every rattle between 18-2100 rpms?

 

Got one of these ordered today!

Along with these wide/cornering lights for the front! Im going to need a fuse block soon....

 

​