What Have You Done To Your 3rd Gen Today?

Bilstein 5100: 2" front/1" rear
Fuel Rims: 17x8.5 with -6 offset
Bf Goodrich Ko2 275/7017
Dipped grill
LOTS OF MUD.





Took some work but got it good as new

 

Got my new rear bumper on and then this happened while I was in a supply store. Sucks! At least the guy didn't take off.

 

Yikes!

 

Damn! At least no one was hurt

 

Thanks! I like how its turned out so far. Its ome 888's, bilsteins with aal and uca's. I ended up with about 3.5" of lift and am running 285/75r16s on stockers with 1.25 spacers.

 

Mounted my new tool box!

 

Can you get some more side shots. I want do a similar setup and it would be helpful. Thanks

 

That's right. Just my truck and my feelings!

 

I only get 20 at a time from Walmart i got that deal about a month ago for $2 at Lowes now its gone up. So I get it from Walmart for 2.50

 

Def a huge difference, much cleaner look and better quality. One of the first things I did to mine. The stock lights are so dim, should have came with LEDs. I still can't get to my license plate lights, all I do is bust up my knuckles however I attempt to remove them. Any tips?

 

License plate lights are a PITA with the tow package... My best suggestion is try to get 2 fingers on the back housing and try to rotate them counter clockwise while trying to jiggle it. Literally took me 25 minutes and a lot of curse words to get those in

 

That is monster mud.

 

This is the real reason I put new springs in my taco.

 

Thanks! I have that exact mount and wire from my WRX. I took it off when I sold it.

I was hoping to see the OP's mount that is flush with the headliner.

Thanks again for the info!

 

It's been a while since I've posted in here and I've made a few more modifications so I thought I'd share. Installed the ARB bumper and Warn Zeon 10S. Very happy with both. Also mounted the ARB twin compressor but haven't had a chance to wire it up yet.

 

Installed my Wet Okole front and rear neoprene Realtree seat covers today.

 

Side of truck, or side of spring pack?

 

Ok what's the word on after market air intakes and low end? Should I go with:
k&n or AFE?
Stay with stock and use a drop in performance element?
Buy the TRD performance unit?

I don't care much on the top end, looking to boost torque.

As always your input is greatly appreciated.

"Forgiveness is easier to get than permission."

 

https://www.instagram.com/p/BTUacZ2FF8j/

I hauled garage doors.

 

The front bed rail has pissed me off since day one. After reading all the leaking canopy/tonneau threads I decided to buy an aluminum tubing with the same dimensions as the stock bar, only wider so there was no horrendous gaps to fill. Mounted it up today, some minor trimming on the stock plastic but otherwise it sealed up pretty tight and ready for a canopy!