Norcal Spotted and BS Thread

Probably me being overly cautious but be careful with a co2 cylinder stored inside the vehicle.

If temps get hot enough and they blow their pressure relief safeties it'll be a shitty place to be, and extremely dangerous if you're driving, particularly with multiple occupants and/or kids.

I underfilled our cylinders to usually around 17.5-18 lbs and still had some blow on hot days.

 

I have the stock bumper from my 2014 you can have dirt cheap. 10-12 weeks on the Relentless bumper? Good luck. Took 8 months for mine. Worth the wait, though.

 

I bought the 810, it fits a 10lb tank. So not sure about a 20lb. You are likely mounting it in a different way, but these are the rivnuts I used for the composite bed.

$21 S25MG500 Steel PRE-BULBED Shank, Multi-Grip Rivet-NUT Gold ZINC Finish, 1/4-20 X ..280-.500 Grip Range (Pack of 25)

https://www.amazon.com/gp/product/B010GQXMAW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

 

they suck and i've filed a complaint with them. Thats where i bought the ring from and the sales woman treated me like i couldnt afford what i wanted and i should leave.

Im pretty sure she no longer works there.

 

Look an awful lot like my Pro Comps.

 

Good to know, will have to look into how the 4runner guys deal with it.

Just checked and it's actually a 15, their site sucks, but the 810 should work. Thanks for the help!

 

15-10lb same diameter, there is a way to adjust the bracket

 

Walnut Creek. Not surprising. I've only been in there once. I'm surprised they let me in. I live in shorts, tennis shoes and a hoodie.

 

Like @jberry813 mentioned it'll only be a possible problem with a full tank. Just something to keep in mind.

20lber will empty itself in about 30 seconds with a blown safety, so it's a very high concentration inside a cab in a short amount of time, and obviously highly toxic

 

Interested to know if the 810 works with a 20lb as my ten runs out after a few trips

 

Those are great, i have them all over my taco and crawler. Theres boxes full of them at my work from the emergency vehicle upfitter dept thats all leftovers.

 

Vin has one thing they dont. Better bs and offset. To bad they sell out so fast. If had more stock he would makin some change.

 

I think scs are lot better looking. The small details are key. Vxt is only a close knock off. But pro comp has been making that design for awhile still slightly different. And bs and offsets are different as well.

 

Who was it that found bolts that work in the bed rails??

 

I use unistrut nuts and grind them down a little. But Jberry posted Amazon link for t nuts

 

$24 Te-Co 41406T Black Oxide 1018 Steel Tapped Through T-Slot Nut, 3/8"-16 TPI, 5/8" Height x 7/8" Width x 9/16" Table Slot (Pack of 5)

https://www.amazon.com/gp/aw/d/B009...ords=t+nut&dpPl=1&dpID=41dMVi7up0L&ref=plSrch

 

Full size 35x12.5 or 35x10 for spare?

 

What?