What Have You Done To Your 2nd Gen Tacoma Today?

Looks like I need to pull the center console based on basic following the wires

 

Thanks. I like black wheels too but they're kinda played out IMO.

 

$1200 for an arb and compressor. You should be good to go!

 

Steveo27, Just ordered a set of those striker plates. Good find.

 

Keyless entry, got my spare key fob working!

 

Is it as easy to install as the instructions make it look? Does the compressor end up in the way of anything that you might need to get at for regular maintenance? Any rattles or interference? Any thoughts about space left for the double ARB compressor?

 

Honestly graphite or gunmetal wheels look the best on Pyrite compared black or bronze. I think even chrome or machined wheels look good. Pyrite with bronze wheels to me is like wearing a khaki t shirt and khaki shorts. Bronze literally looks better on any other color except silver trucks which is a bummer.

 

Used it a bit again. Most use its had in a while, lol

 

This. Wheels should NEVER be black.

 

Katskins aren't covers so if you want covers and something leather you should look at clazzios.

 

Big and light weigh. Nice!

 

Finished the black leather seats on my 2015.

 

Did you buy new plastics or paint them? The ones on the bottom of the seat

 

Three coats of matte black baked for 3 hours at 140 degrees followed by 2 coats of clear matte baked for 2 hours at 130 degrees. Durability seems very high for this process.

I have searched and asked, but I did not find any of these parts in black, only grey.

 

Replacement skins work too. I've done those before

 

1 inch? Whats your opinions on it/reasons fpr removal

 

Please tag me when you post your results as I'm very keen to hear about your results and overall opinion.

 

I like voltage in there and gotta have the Trans temp 1 and 2 in there also!

 

Pro Tip: For plastidip, drop the spray cans in a bucket of hot water 10 minutes prior to spraying. It heats up the paint, and it atomizes MUCH better. No clumps or clogged nozzles that way. Spray a coat, back into the bucket while it's drying.