Colorado B.S. Thread

joined the club eh?

 

Viair 380C? should or shouldnt i??? used compressor...

or should i go new 450c

 

Figured I'd give it a shot!

 

Look at the time to fill tires and duty cycle. When I last researched Viair the 400p or 400h was the best of both worlds

 

So any one else already turn on the water to the sprinklers? Temps dropping in the 20's. Should I try and drain what water I have in the lines. No compressor. Or should I just leave the water on and lines full?

 

I wouldn't worry about the underground lines since the freezing temps will last less than 24 hours. I drained my vacuum breaker which is above ground though.

 

Ok I can do that.

 

Who's building bumpers for our trucks locally? What's the going rate for something like the Pelfreybilt Hybrid bumper?

I'd like to not pay shipping and pay $900-$1000.

 

You flat landers talking about snow. It has been snowing here for the past three days.

 

http://truck-hardware.orrorr.com/viewitems/drawer-slides/heavy-duty-full-extension-slide

I've used the shorter versions of these before and they worked well, very stout.

 

My power just went out twice. Bet there are going to be lots of broken tree limbs by morning.

 

And since that first post it's gone off and on three more times already.

 

Weird

 

Heavy snow after trees bloom = carnage. We'll be working outages all night and all day tomorrow. Just know that all hands are on deck for this one.

 

https://www.outagemap-xcelenergy.com/outagemap/?_ga=1.33786660.428508414.1493434360
If you're interested to see outages

 

http://www.heftyfabworks.com/store/#!/Front-Bumpers/c/13441648/offset=0&sort=normal

http://www.insainfab.com/off-road-products-1.html

https://armorology.com/underconstruction/

 

srslywtfbbq



It exploded lol

 

So you're wanting me to test them... Ok, twist my arm.

 

did it fill with water and freeze?

 

Good thing I changed out my rotors and pads yesterday. Bedding them today would have been interesting