How to install bike racks on factory tonneau cover

After testing Thule, Rocky Mounts and Yakima. Only one fit the height requirement to enable the tri-fold to close. The

$79 YAKIMA - Locking BlockHead Permanent Locking Fork Mount Bike Rack for Transporting Bikes on Trucks and Trailers With Flat Beds

Yakima blockhead is the one and it happens to be on sale for only $34 each right now.

All in all the project cost around $100 for 2 bike mounts.

Currently I am using velcro and gravity to hold the back wheels. But, I plan on mounting some small

$15 DC Cargo V-Ring Tie-Down Anchors |4 Pack | 2" Diameter Steel Bolt-on D-Rings for Cargo on Trucks, Pickups, Trailers |Flush Mount Tie-Down Anchor, Replacement for D-Ring Tie-Down w/Plastic Pan Fitting

D-rings when they arrive.

 

Nice idea. I want to do that but hesitant to drill into my tonneau

 

If I ever want to remove them I will just buy

$6 1/4" (0.25") Flush Mount Black Plastic Body and Sheet Metal Hole Plug - Qty 25

1/4" hole plugs.

 

I went with the KB VooDoo Outboard Bike Mount myself

 

He stopped making those

 

Unfortunately yes. Love mine.

 

Yeah that was my first look into bike mounts

 

Same here, but im waiting until I buy out my lease (unless I get a new one).
Then im going to add some anchor points on top to haul whatever.

One thing is the tonneua will still leak like a sieve on the outside edge.

I also wonder why they didnt put another strap/buckle on the first/second section, to keep it from flying back, like they did when both sections are folded back.

 

Hey OP - why didn't you want to fold the cover forward snap the cover down and put the bike mounts on the btm of the tri-fold cover?? Curious as I'm thinking of how to do the same or similar.

 

That would work but then you loose the bed security with the closed cover.

Also you would have to reinforce the top side like I did on the bottom which might look strange when it's closed.

If you want to mount the bike with the cover open I would suggest just removing the cover and attaching a bike mount to the head rail system underneath.

 

These oem tonneaus aren't very secure to begin with. All it takes is someone with a coat hanger/slim jim to pull back on the release handle and they're in. I wish it had a lock to them.

 

Keeps the honest people honest...and keeps the rain out. . Thieves will get into anything if they want it bad enough.

 

Good point... I have a rail for the front of the bed from 2nd gens and was going to go that route but taking the cover off every time I wanna go bike riding prolly not in the cards... too much work.

I have a VooDoo bed rack that's short that would work for sure or do like you did... that's a pretty good option you have there considering our options.

 

There's also these...

 

@KB Voodoo Don't you make a bike mount that hangs the bike off the side of the the bed?

Looking for something that works with my bed rack and I don't need to pull the front wheel to mount the bike.

 

Look at post #4

 

No longer produces them... copy that. Will just have to build my own.

 

Soft Topper makes an outboard mount.

http://www.softopper.com/accessories-parts/bike-racks

 

Being discontinued though, looks like they only have passenger side mounts.

 

Looked at those but like I said don't want to pull the front wheel every time.