Old Man Emu setups on 1st gens

Been driving this set up for a week now. OME 883 coils, drakars w/ aal, & nitrochargers. Rides great. However I do have a lean which I didn't have as much before.

 

What size tires? Build looks great. Lean doesn't look bad either

 

Thanks! Currently on 265-75-16 ko2. I'll have to get some measurements after some more miles to see what I need to do. I've got a set of 285-75-16 at the shop. Anyone else's opinion on 285 vs 265?

 

I went with full OME lift as well, and to me the 265's looked to small on the truck. I switched to 285's about a month later. No rubbing issues and I havent noticed much of a drop in mpg

 

https://www.tacomaworld.com/threads/boot-slide-mod-no-more-blowing-cv-boots.146070/

 

No opinion on the tires except I think the 285's would look dope on your truck.

 

I run 285's minor rubbing on full lock when compressed on rt side, but it's only rubbing the plastic fender liner. I do have the pinch weld smashed flat and some other minor trimming around the plastics, just need to do a little more trimming. I do have 1.25" spacers though....

 

help please....my truck, 2004 double cab V6 TRD offroad, has relentless plate front bumper and relentless plate rear bumpers with a winch (synthetic line) and rock sliders. It usually has a bed slide, bed cover, rack, and RTT plus other gear. I like the stock ride height, but now that all the stuff is on the truck it sits a little lower. I don't want too much of a lift (maybe 1" over stock). I like the OME setup.

Which OME springs will return to factory height plus a little with all the extra weight?
If I get the Dakkar rear spring will I be able to maintain the same ride height as stock?
As the gear goes on and off the bed I would like to maintain the same ride height, can airbags be added with the OME rear setup to do this?

 

the Dakars are going to give you roughly 2.25" of lift. I got about 2.5" and just have the shell on as far as extra weight goes

 

are those SCS wheels?

 

They look like those Level 8 MK6 from Discount

 

They are Level 8 MK6 from Discount Tire. As of today, however...I have added 285-75-16 General Grabber x3 tires. Will post pictures soon.

 

Nice! There's a thread about those tires you should post them up in as well.

 

Heres a couple with the 285s

 

What set up is this?

EDIT:
Nvm, I just saw the previous post.
OME 3" , although the first gen kits are 2.5 so how did you get to 3?

 

Did 5100s and OME 881 springs with the 10 mm spacer on mine.

 

Finally got tires installed yesterday. 265/75 KO2. 881,Dakar's, Bilsteins. Sorry for crappy garage pics. Been raining for 2 days. Will get better pics today maybe

 

Not sure if it's exactly 3 but I have the 883 springs without a aftermarket front bumper.

 

Pics as promised.Love the ko2's

 

Awesome!