Northern Virginia Roll Call

You are replacing OEM billies with OEM billies? if you need a dremel, or angle grinder, those make quick work of the job and I have both

 

I have an angle grinder and access to an air-powered cutting wheel. And yes, I'm replacing my whole setup with the oem set from @Me. Projekt because my set is pretty dead.

 

Looks like Davids is short!!

 

SOUR CREAM! Proud of you man!!!

 

Didn't touch anything on that plate except the GUAC

 

Atleast you got what it takes to handle QUAC. You still have time to learn whats good for ya.

 

I ended up having to cut mine out.

 

if they dont break free after i try vise grips i just cut them. saves alot of time.

 

^^^ what I had to do with mine, Wasn't saving them, so I cut away.

 

So, who knows a good place to get an alignment in NoVA, near Alexandria preferably?

 

@Coot83 might know that place. I like going to High Tech in Chantilly. Their alignment is around $150. @Sand_taco works at Ptuning in Manassas and can get you aligned for around $120.

If you are on stock suspension still, might as well go to a standard place

 

My suspension is def stock enough for a normal alignment.

 

I went to merchants for mine and paid I think $89 for 6 months of coverage on alignments. I know they are only merchants, but since you don't have anything crazy suspension wise, that might be ideal for you since in some ways you are considered "stock" with your suspension set up.

You could also look into firestone where they offer the "lifetime" alignment for $150. If you ever get crazy with your suspension, this could void it, but currently I don't think you would have any issue.

 

if its a stock Tacoma we could do $100 for the alignment

 

It has an AAL, but besides that its all OEM.

 

i can get it done for 80 for you? but im in sterling

 

Nice man I didn't know you had the capability to do alignments.

 

friend of mine does them for me. we dont have a alignment rack at our shop. i used c&c but he wont do custom specs so i take it a local high performance shop. does amazing work

 

cars are more since they usually have front and rear adjustment. since our trucks are just front can do it cheaper

 

That should be no problem