Fender liner

I need to replace my fender liners - looking at this - any suggestions - experience - links. Thanks for any advice. http://www.partsgeek.com/catalog/2008/toyota/tacoma/body_mechanical_-ar-_trim/inner_fender.html

 

Is your truck a 5-lug?

I'm just seeing a big list of parts for several different models.

 

6 Lug

 

Will do - I'm going to call Parts Geek on Monday and make sure I'm ordering the correct ones - I also want some push pins as some usually break when you remove them from being brittle with age.

 

I'm thinking we should be able to do both sides and push pins for about $85 - hope so anyway.

 

I did this awhile back. I went ahead and ordered all new plastic clips. I broke almost all of the old ones removing the fender liner. It was a challenge to get it off. One thing I can tell you is that there are a few hidden clips located under the fender flare. Also, if you have any kids make sure that they wear earplugs. Thanks to me, my neighbors kids are now properly trained to cuss like a drunken sailor.

https://www.tacomaworld.com/threads/fender-liner-removal-how-to.454777/

 

No, I was able to get the liner off without removing the flare.

 

You haven't experienced flimsy plastic until you've put in generic Chinese fender liners. Half the time they're as flat as a board, too.

 

https://www.ebay.com/itm/120648203972
Like these?

 

I plan on going this way - a little more $$ but hopefully it will address the problem you bring up.
Quality: Capa Certified - Ensures the part fits, performs, and lasts the same as the original.

 

Thanks for the link - I'm going to read it right away.