Spacers

Have the skids. Have the bumper. Have the winch. Sliders next week. Tires in 3 weeks.

Now with tires. I have 265/17. If I goto 285/17 will I need spacers (Front and rear or just front) if I docan I use spidertrax 1.25?

 

I just put 285 on mine, I mounted without spacers at first. While on the lift it had about 1/4 inch between tire and uca. I assumed with full lock and off-roading I may rub, so I ended up adding BORA .75 inch spacers. Worked great and wheels are basically flush with fender.

 

Did u do 4? Front and Rear?

 

285/??/17 ??
What tires you looking at?
What about a lift?
@Arcticelf

 

285/75/17
Kings front. OEM coil overs.
JBA UCA
Kings rear. Dakar rear springs

 

Be careful using anything less than an inch. If your wheels don't have pockets for the stock lugs they won't fit and you'll have to grind them shorter.

Anything over and including an inch work fine though.

 

I think arcticelf has or had spacers or maybe finch.

 

What kinda tires?

 

I do have the stock rims on now

 

Wouldn't do wheel or lift spacers if you plan to offroad also you need more than just lift to fit larger tires. You spent 35k or more for a truck don't cheap out on a decent lift. Spacers will not be good for it.

 

KO2

 

Those aren't stock wheels though.
Stock wheels on an OR are 16x 7 or 7.5.

 

There's nothing wrong with spacers. Off road or not.

 

Ah bro tires...
Had those on my tundra great in the snow and wear well. What load range?

 

He's getting a nice lift though,kings.

Nice to have you back.

 

I got them from Toyota. I built truck off toyotas website and they put them on. Think it was a port option?

 

Wheel spacers will take their toll on your bearings. As far as spacer lifts, looks like your going kings so I'll save that soapbox pep talk for later. Truck looks and sounds good OP.

 

Not sure if the offset /back spacing and width are the same as mine. Looks like it may be.

 

It shows E