Will a 33x12.5r20 work on 3.5 in lift without rubbing

I am going to buy an icon stage 2 3.5 in lift with a 33x12.5r20 tire and a 20x10 maverick wheel. Will I have to trim anything or will they fit fine with no rubbing.

 

with a quick google search you can find your answer man. GLWS!
https://imgur.com/Zzqtwol

 

This gif is great.

 

Look at doing Cab mount chop, then BFH to hammer down the pinch weld and you still might rub

 

You'll need the -24mm offset / 4.5" BS option to avoid rubbing the spindle/UCA. You will most likely rub the cab mount and the fenders even with your lift.

 

2wd or 4wd? if 2wd, you can do a spindle lift and get up above 3". if 4x4, stay at 3'"or less for the sake of your cv axles. or you can drop bracket lift that sucker, and go up to 6"

 

I had 305/60r18 (32.5x12) tires on a 18x9 0-offset rim. Just barely cleared the UCA. Had to remove the mud flaps and trim the cab mount. This is with a 3" lift.

 

Shouldn't rub with 20's its a mall crawler so not flexing

 

You'll need to cut the cab mount and hammer the pinch weld, as mentioned above. Also as mentioned, don't go over 3" if 4x4. You'll probably still rub a little, as already mentioned.

Enjoy your mall crawler. If that's who you are, own it with a smile.

 

If you are doing 20's why not a 6" DB lift on 35's?

Yes. You will rub with 12.5" wide tires.

 

This

 

Don't forget to do the stretched tires mod

 

Eeewww.

To each their own I guess.

 

Come on. If OP wants 20s, let it be. I wouldn't, but we aren't talking about my truck. 6" lift does look really good with 35s though.

 

yeah he knows im stealing his dope gifs! haha.

at least im pretty sure he made it....

 

I even streamed when I was making it.