What Have You Done To Your 3rd Gen Today?

SWEEET combo. Love the Gobi and the house looks great too !! Well done sir, first rate all the way around !!

 

Smells like Harbor Freight!

 

Thanks man, was a tough week for sure, but things will get better. Always do. Yeah, expo was awesome, camping was amazing. A little nature therapy always does the body good.

 

Just installed the brake controller:

 

That same thread you ordered the part from explains how to remove the panel. It pops out from the top I believe.

 

Not much, just a wash and polish

 

These are sexy. What's was the final cost? Sure it was cheap!

 

Installed my Shiftsense Pro today! I've only driven it a few miles, but I can already notice the difference. This is definitely an upgrade to the stock automatic transmission.

 

This shift sense pro thing is blowing up. I think I will buy one next month!

 

Might be two of us. Anyone in the southeast Georgia area have one???

 

Finally got all 4 Plasticolor mud flaps on. With 265/70/17 KO2's the fronts were slightly rubbing on full lock. Had to add a couple of screws to tie the flap back on the inside of the fender well. All seems fine now. Good thing these are flexible.

 

Love those tires

 

I too love the tires but found out quick that they are mud slingers thus the flaps. Now just gotta find a 17 x 7.5 spare for my 5th KO2 to mount.

 

Installed Shift Sense Pro and ground bracket above water inlet hose.

 

Washed the truck for probably the 4th time since July.

 

Did you immediately notice a difference with the Shift Sense Pro?

 

yes. going to go to that thread to leave a couple notes

 

I must have missed this previously. May I ask what this mod is exactly?

 

265/75 geolandars mounted, debadged
(that was a bitch), oem running boards removed (for sale, local pick up, socal msg me)

Today was a good day.

 

Finally completed my sound deadening project. After doing the doors, floor, and rear wall I finally reached the final frontier. I used the excellent write up on how to remove your headliner by @GHOST SHIP for 2nd gen Tacos and it was very similiar except for the rear seat grab handles and clothes hangers. After completing the entire mod one of the last things I did was to reinstall the rear grab handles and of course one of the spring clips decided to fall into the headliner. I had to waste almost an hour taking down the headliner on the drivers side just to get to that spring clip. I put Dynamat on almost all of the exposed roof and then some scraps on the cross members which were acoustically separated from the roof. Finally, I put 2 rolls of Frost King closed cell foam which gave complete coverage with double coverage over most of the roof. It does get hot here in Florida. Definitely looking forward to having both noise and heat reductions.