What Have You Done To Your 2nd Gen Tacoma Today?

PREACH!!!!!!!!!!!!!!!!!! Well said sir, well said indeed. Wish I could give your post a million likes.

 

After re-reading this i think it would be better to call this a mod. Your lady has accessories not your truck....

 

It's easier to get away with it if it's an accessory than a mod, IMHO.

 

Hauled a bunch of concrete in it and sat some posts for our bramble trellises.
IMG_1315 by seanbonham69, on Flickr
IMG_1317 by seanbonham69, on Flickr

 

Haha.... I like the way you think!

 

Could you explain that wiring of the switches a bit more in detail? I can see you've jumpered the power and ground, but why have you jumpered everything else? There's only four wires coming away from a six-switch panel? Forgive me if I'm missing something here, but to me that doesn't make sense...?

 

I want this thing to work... I tried looking for a diy... anyone got a link or know how to fix this?

 

The black and red are your power on / power off. Your main source of power. The blue and yellow control the upper and lower LED lights on the switch. What you don't see is there is going to be one more wire from each switch individually that runs to his relays

 

It seems as though the original powder coating that came with my bed sill protectors couldn't handle the winter here in Canada... looks like I'll be doing a bit of painting over the next weekend!

 

I realized a few years ago, when helping a nieghbour do this exact thing, that there is an easier way! When I redid 5 post for my 6' privacy fencing in my yard, I used something called 'Sika Post Fix' It is the easiest way to put posts in I have ever used. Dig a hole, rip the bag open (its a 2 part bag) pour the 2 parts in the hole, toss the bag in the hole. Done. It turns into this foam that is amazing. No mess, no water, no heavy concrete, or mixing. My posts have not heaved at all in 2 years.

https://www.homedepot.ca/en/home/p.post-fix.1000651811.html

 

Damn, I wish I would have known. Concrete work is back breaking. Well actually, the giant Poison warning label that foam stuff would have kept me away. These holes are right by the berry and grape plants we will be eating. I'll stick with the $3 bags of the old stuff.

 

Got it. So black and yellow both go to ground. Red is hot from main power, and blue is hot from ignition power to light up the switches. I think I follow now. Thanks!

 

Anybody know where I can get one of these little plastic bolt covers?

 

Yep exactly

 

If you take a closer look at your concrete bags, they will have corrosive and poison warnings as well.

 

No. But I found this.
https://www.carid.com/sherman/rear-bumper-step-pad-mpn-8125-351-0.html?singleid=53211026&url=1714032

 

camelback Toyota parts.com has them

here is the part number 52592-04010

 

I don't know the specifics but I know it requires taking it apart and resoldering something that came undone. Maybe if you take it apart it'll be obvious.

 

"Get out my GOT DAMN classroom befo' I break my foot off up in ya ass!"

 

Just pull it apart down to the board and look at the 2 - 510 resistors. one or both will be obviously in need of some re-soldering on one end



Edit: Here's a good example of what you're looking for (although it won't be sticking up in there air quite this drastically)