What Have You Done To Your 3rd Gen Today?

Need more "get up" in my 2016 TRD Off Road Tacoma. Thoughts? Ideas"

New intake? If so, what is the best one?
Should I put a chip in it?
Looking at doing a Borla Exhaust. Thoughts?

Any luck on finding a company that installs a supercharger or turbo for it?

 

No chip, supercharger or turbo for 3rd gens yet... Sorry.

If you want to try these out, and aren't worried about passing emissions, I'd suggest

This:
http://urdusa.com/store/Exhaust-&-H...Pipes,-2016+-Tacoma-3.5L-V6/product_info.html

This:
http://urdusa.com/store/Exhaust-&-H...URD-Y-pipe,-Tacoma-2016+-V6/product_info.html

And This:
https://www.dz-custom-innovations.com

Maybe a aFe intake w/ scoop as well... And aftermarket muffler (Borla is good).

Get all that Installed and then report back.

 

Best thing I've done for performance is 4.88 gears. Totally different truck. Fucker moves now.. I do also have an airaid intake

 

What did they cost you? Did you put them on yourself?

 

$423.99 shipped with the tacomaworld discount. Easy to install, only took a few hours with a few beers. Instructions are spot on. While easy overall, it does take some effort and my hands were tired afterwards, worth it though.

 

https://www.tacomaworld.com/threads...troller-now-available-for-gen3-tacoma.490113/

 

I blew the fuse in my Mictuning harness the first time I turned it on because it shipped with the 10A fuse installed and really needed the 15A.

Edit: nevermind just saw your later post.

 

Interesting. I love my truck, but hate the over shifting so this is very tempting. Anyone have experience with it ??

 

Read through the thread. Only released a few weeks ago and A LOT of guys have already ordered it. For the ones that have received and rested, everyone loves them. I've yet to see a negative review. All really positive. Some guys were going to regear for $2,500 and now don't feel the need to.

 

Stoked to finally get my Toprac and awning on. Bring on the sunshine !

 

So rad!!!

 

I'm gonna give it a try... just ordered it.

 

Interesting, the design looks very similar to Salex. I wonder if the Salex design was knocked off by Salex own manufacturer. Not uncommon these days.

 

Awesome!! What's your order number? Be sure to watch the install video on the site

 

OME 887s

 

OEM toggle switches usually have 4 wires.

12v for the LED. Attach this to the circuit for the in-dash lights so it'll turn on and off with your dash lights.

12v for the signal. Hook this to either straight 12v or ignition switched 12v depending if you want power when the truck is off or not.

common ground. Find a bolt in your dash or run the wire into the engine bay.

signal to relay/device. Run this wire through your firewall (along with the ground if you so choose)

Thexton THE475 Wire Insertion Tool

Get a wire insertion tool like this one to make poking a hole in the firewall grommet easy.

 

Installed header rail and caps
Wash, clay bar, seal, and waxed
Removed TRD Sema rims and tires, cleaned front and back of rims, coated with Dr. Beasley's Matte Wheel Seal
Pressure washed underside of truck and renewed by application of Fluid Film
Did the cooling line bracket mod (grind down so cooling line doesn't rub on bracket)
Oil change and new aluminum filter housing.

 

AWESOME!!!

 

Installed a little TRD badge last night.