will 285's rub

I have a 3inch toytec lift on my yota and im thinking about putting 285/75/16's on it. I was wondering if they will rub and if not what wheel offset do i need

 

Yeah they will definitely rub but you could trim just a little bit of the fenders and its gone thats what i did

 

yeah i figured they would, I am running 33/10.50s with stock wheels and they rub a little bit on the frame at full lock

 

O wow im at 285/75/16 and only rubbed on the fenders didnt know that would rub on the frame. Spidertrax wouldnt help you would just rub more I learned that today after i just put my spidertrax on haha. Hmmm sounds like your gonna have to do the body mount chop

 

They do just a little on mine. ONly when turned all the way in either direction though.

 

are you running stock wheels

 

your rig looks sweet man

 

are you talking to toy02ota?

 

Yeah they are stockers...for now and thanks man! I can't take the credit for her stance tho. I found it like that and bought it

 

it lokks good with the 285s, but i think i might settle for the girl scout tires and go 32s so i dont have to put up with the rubbing plus get a little power back

 

THats ok. my dad has a 97 Z71 with girlscout tires.

whats up with those chevy people

 

put it this way i have pulled out 6 trucks in the past year and 4 of them were chevys

 

What are spidertrax

 

http://www.spidertrax.com/s.nl/sc.2/category.169/.f

 

sweet thanks

 

I've got 285/75-16s (BFG ATs) on my '01 DoubleCab with a 3" ToyTech lift and didn't have any fender rub with stock rims. They did rub the frame a little on a full turn though. Nothing too bad. I put those tires on some aftermarket 16x8 American Racing wheels and have no problems at all now with rubbing. They are an inch wider than stock, and I think another 1/2" positive offset.

 

i have a 3 inch revteck lift with 285/75/16 and they are on stock rims. but im wondering would 16x9 wheels with 4.53 bs and -12 offset be able to run with no problems?

 

you should have no problems with those. They will bring your wheel and tire out away from the UCA and give you more clearance.

 

My old 04 Taco PreRunner Xtra cab had 3" Toytec lift w/285's and stock rims. Rubbed on full lock-to-lock turns on frame only. Fenders were OK. Looked good too