Front bumper suggestions for added protection, functionality, and zombie apocalpyse

They make it without. You can do no hoops, center hoop with or w/o braces, or full hoops.

http://sosoffroadconcepts.com/2016-tacoma/

 

My friend and I made mine If you have the tools I recommend it. Mine is steel and barely weighs 100lbs. Sorry not the best pics dam iphone...

 

Congrats, you picked the "right" color, lol. You can run down zombies all day and just a light rinse will make it look great.

 

ICI is going to be working on bumpers for 3rd Gens later this year. I'm probably going to get the RT bumper for my 2nd gen.

 

I have those coilovers okay at 650 lb. but if add winch you will start to feel it starting to bouncing slightly over bridges.You may get away with heavier shocks to absorb bounce but I just went with 700lb Coilovers. Weighted truck.,front axle 2920.Ten pounds over fgawr

 

@CBI Offroad Fab T3 front aluminum bumper is amazing! super light and well built... installed it by myself and could pick it up with one hand. It also has a lot of options for hoops and they can basically customize for any application for instance I needed it wider to accommodate my bushwacker flares...

 

Nice work!! Especially if you MADE this!! good stuff

 

This is one hell of a set up!! Very nice! That front bumper is really extended and unique, what brand is that? I am really liking those bars on the side of your truck that connect with the rear bumper, what rear bumper is that? Once again, nice touch!!! You are giving me ideas here for my own set up.

 

Fab Four's the one you were looking at without hoops and Bar

 

Fab Four's rear bumper also had slider attachments made for it

 

Thank you for letting me know CBI off road fab. I'm really considering getting bolt fender flares, so it's good to know CBI can accommodate to that.

 

yup just tell them you want the same set up as me and they already have the dimensions and whatnot... take a look at my build thread and you can get some better ideas... also I have a full write up on the install so you would have the best of both bumper and directions!

https://www.tacomaworld.com/threads/2016-tacoma-t3-front-bumper-install-review.461582/#post-14653814

 

Pelfrey bilt is in lemon grove. They're good peoples

 

I just saw your set up... damn!! good stuff!!

I am very interested in the rear set up with the extra gas tanks and tire.
Is your camera functional in the rear? Any modification to make your camera work?

 

Glad you posted up, I was about to start writing the whole long story on mounting and weight etc.

 

Does anyone have the inside scoop on when RCI is coming out with theirs? They have one on their company truck, but none on website and haven't replied on instagram when i asked

 

Pelfrey high clearance rear with wilco tire gate. Rear camera is functional. But just barely

 

the camera is still functional... you can see directly back and the hitch area but the peripheral view is obviously obstructed a little from the jerry can holder and the spare tire. you can always relocate the camera but honestly its not that important to me...

 

Thanks!

 

Want to make another and ill make a trip out to montana