Florida B.S. Thread

A hand with what bro? The maintenance?

 

Yup.

 

Im good man but much appreciated. Dude your not infront of Petco right now by chance are you?

 

Nope home. Finally not on call this weekend.

 

Great weekend not to be on call

 

Anybody know of a good alignment shop near St. Augustine that knows how to adjust Light Racing UCAs?

 

If you bring the sheet from SPC Performance website with all the instructions, most should be able to

 

I set my uppers at C position, then set the camber in the middle temporarily. Then I set the lower cams at full negative in the front and full positive in the rear. Then adjust the camber and toe on the machine.

 

Thanks Paul
I saved those and sent them to my phone!

 

I will say that the camber is tricky to set on the machine. I ended up with about 3 degrees pos caster and still great clearance at the cab mount. I work in leesburg and can do it, not sure if you want to travel that far.

 

Kind of a road trip, I would but can't leave mom alone for long without her getting into trouble...
Care giving can put a serious crimp in your life!

 

More experimenting with 50 watt cob pods this time though I'm trying a 60 degree lense. Only real speed bump is how to seal the front since the lense surpasses the usual protective layer.

 

You swapped FJ case in? I'm doing mine early fall. What are doing doing for front Diff actuator? Momentary switch?

 

I'm digging it Kenny. possibly filling it up with resin?

 

It would be nice if I could take it apart. I'm thinkin of trying to form thin plastic around the lense. It should give a tighter beam now though

 

Get rid of it and put in the FJ diff tube part, @xweslingx did the same I believe

 

God damn it everyone taking my idea!

 

Drives smooth as butter? I'm gonna do locking hubs eventually

 

So after getting called into the local mountains here in Wyoming to see if I could pull my old roommate back onto the road I realized I really really need a winch. Any suggestions for a good winch to drop into my SOS bumper? The jeep that pulled him out had a smittybilt 10k winch on the front which seemed to do a really good job. In the bottom pic you can see how we got him out.

Nice old retired guy and his daughters in his new supercharged custom wrangler with a winch, my taco to act as an anchor point for the jeep, and a new taco with traction pads to put under the Nissans wheels.

 

i was actually just looking at winches like an hr ago.... i had a smittybilt xrc8 that was on my last truck, it intermittently stopped working like it wasn't getting power, I wasn't planning on buying another smittybilt, thinking about warn for the next one