Northern Virginia Roll Call

Its still really expensive putting their address

 

What about green ridge state forest? @greengen1

 

Pretty much just forest roads available but there are some that are fun to drive and a couple marked 4x4 only because of deep ruts if you go let me know I'll get you the road name with the water crossing you saw us go thru

 

I want to go soon to that place with @Lots2Learn58 for some camping

 

The deeper water crossing is technically outside the forest but still dirt road for most of it when we hit pavement and headed back to campsite we were about 10miles northwest of forest we did something like 80 miles of dirt road that day

 

Well welcome to the area buddy! Anyone else know of a close MD trail?

 

Have a gps location of where to start?

 

I'll see if @armyofsquirrels marked it on his gps and let you know unless he sees the tag and responds first

 

Really a good thing to do is go to ranger station 1st the women that work there are very knowledgeable about the park and can point you to the more challenging roads we stop in every time and talk to them just stay off any roads that have blockades even if there open cause you may get locked in those will get you in trouble if caught they are the old jeep trails that are closed for use now

 

Thanks for the advice!

 

When @Me. Projekt puts 15x22 wheels on his diesel..

 

Hm....

 

Its gone already. @Nimble9 got it

 

Well....

 

My bed stiffeners things showed up today. They look pretty good.

 

Ok guys. Here is what I'll be selling. I only took one picture of all the stuff, so if you want more detailed pictures, please let me know. I think (hope) I priced everything reasonably well. Most of it is lightly used, or not used at all and deeply discounted. Everything functions fine. I take good care of my tools. If you have beef with the prices, please feel free to take advantage of me like a drunken slut. Cause @Me. Projekt is bringing booze this weekend so I likely will be....
---Craftsman laser level with tripod (used a couple times) - $5? If you buy something else and want it, I'll toss it in for free.
---Viair 88p (new in box) - $40 potentially taken by @Lots2Learn58
---Bearing race and seal installer (never used) - $30
---I know @Lots2Learn58 was interested in my impact, so I think it fair to offer him first dibs. Craftsman 20v Lithium Ion 1/2" impact. Battery is still running strong, had it about 6 years. Has good torque. Also have Craftsman 1/2" impact sockets in metric and standard. Metrics run from 12mm up to 27mm, with varying sizes. Standards run 7/16 up to 1 1/16, varying sizes. These come in standard depth and deep sockets. Also comes with impact extensions and I think there is a knuckle in the bag with the impact driver. This impact socket kit sells for $150 brand new and these are in excellent shape I would like to sell these together - $150 for the set including 20v? If that doesn't seem fair, let me know. Taken by @Lots2Learn58
---Gearwrench axle nut impact socket set (includes 29, 30, 32, 34, 35, 36, and 38mm 1/2" sockets) - $30 (if you buy the impact and sockets, Ill throw in the axle nut set for free) again, @Lots2Learn58
---Craftsman 1/2" torque wrench. 20-150ft/lb is the range (this thing is awesome)- $20 taken by @Me. Projekt
---Tekton breaker bar 1/2" drive, 24" length (used once or twice) - $10 taken by @JWROSE4
---Arb ez deflator (never used) - $10 taken by @boogie3478
---Rotor pullers. I have the kind that clamps on for domestics (this one saved my butt on my sister in laws jeep, the rear rotors wouldnt come off with a BFH and this was the only thing that pulled them), and the ones that screw in for imports - $50 for the set
---I forgot to get a picture of my slide hammer, but if anyone is interested I will let that go as well. I think I paid about $75 for it and used it once on Davids truck - $40
Now for the freebies:
---various hanging lights (the two in the top corner) One is fluorescent, the other is like the surface of the sun, but is nice and bright. taken by @Me. Projekt
---Skil 4.5amp jigsaw. It works fine and I believe there is a package of blades in the box with it. Taken by @fatfurious2
---And last, but certainly not least, carpet stretcher *giggity*



I also have this toro lawnmower that I bought last year. It was used last cutting season, and this cutting season. After a couple more weeks, I'll have no need for it. If anyone is interested and willing to wait till mid june, I can get specs of it and what I would let it go for. It is awesome though, B&S engine, blade clutch, self propelled.

Best option for me would be local pickup, and people come get the stuff from me. I can do paypal (gift, please) or as always, cash is king. If you are strapped for cash but really want an item, I would be willing to take some cash up front and would be willing to give the benefit of the doubt that you would pay up the rest asap. You guys are like brothers to me, I feel very much at home here. Even when I sell the truck, I'll be here.
Now someone, please buy my stuff. I have no room for it. Again, if you want better pictures, please let me know.

Oh yeah theres also other random small stuff in the bottom left for free if anyone wants it.

 

I'll take the ARB EZ Deflator!

 

Which ones did you get?

 

its yours. You can grab it when you pick up the creeper.

 

Man i just bought the ez deflator tuesday...thats a heck of a deal. I would be interested in the breaker bar. Just gotta figure out how to get it without traveling 2 hours.