303tacoma Keepin it Simple

Im pretty sure this is what @Star-Lord was referring to I can see where I'll hit in the wheel wells.,
I live in the concrete jungle
Need to take a drive and stuff them.
Unless someone has a better suggestion

 

That is where mine hit. I can see it in from the mud worn off in that spot.

 

Ha I always wanted a dremmel

 

Get the name brand. Not some harbor freight thing.

I love my dremel. I use it all the time

 

Sooooo much better. Cept for the fanger in front of the camera

 

Remove them. But be prepared to buff away the outlines

Ask me how i know....

 

JOO CRAYSEY

i haven't had to do any trimming....

 

That was the plan

I know right!?!

I know you're the one where I got the idea from

 

I know I don't get why
but it is what it is
maybe the 4.3 b/s more aggressive tires

 

+1

 

Hey Rebecca! That truck is looking awesome!

If you really want to know for sure where you're going to rub at full stuff and full lock the best way is to put the front end on jack stands, pull the coilover, and put the wheel back on. Then you can stuff it all the way to the bumps without fighting the coilover. It's more of a PITA on 2nd Gens, but it is the best way to tell where you're going to rub without finding out the hard way on a trail.

Check clearance at full bump straight ahead, full bump full lock left, and full bump full lock right. Typical problem areas are the back of the wheel well at the bottom by the cab mount, the top of the fender well up front under the battery, and the frame rearward of the LCA.

Good luck!

 

Not sure.

But my wheels are 17x8 4.5bs 0mm offset

Same exact tires.

 

Don't I know it <3

 

Thanks
? One side at a time or pull both coilovers at the same time??
I already know Im catching the cab mount.. I'm learning as I go..
This all new

 

One at a time is totally fine.

 

Mine are 17x8.5 -10offset 4.3bs

 

Pm sent

 

Thats why i couldn't go SCS.

No matter how much i love those SR8s and Ray10s. Their sizes suck.

The extra half inch of width is why it rubs. But the offset narrows that down some...so they should only barely rub....but still....

 

Its weird how you don't have more tire poke than me

 

Yeah I know it's just a little trimming
And a CMC
No matter how much research I did
I guess I'm not good at research
And I got an awesome deal on the sr8s I just couldn't pass up