How deep of water would you go with a stock Tacoma?

if in doubt, walk it before driving it.

or get a real truck

 

Month later on Craigslist

Clean truck low miles *CLEAN*

 

I got stuck in this hole for 20 mins yesterday. Please advise

 

Were you in 4 low or high or 2wd? Was locker engaged and how fast were you going

 

Was in 4 Hi going 6 or 7 mph when I got hung up. Thanks Chris.

 

hairy

 

Try 4 low with the locker on, make sure to use some momentum if you can't get through it. Turn locker off as soon as you get out

 

Not a tacoma, but this is the deepest I'm going til I have a snorkel...

 

I'm out, this happened yesterday sorry for the confusion.

I crawled underneath and there was water/mud on the diff breather. I'll assume it was submerged for about 20 mins.

 

Most recently was in January and it was hitting the cab. And this was driving around downtown Houston thanks to the flooding.

 

Get diff breather mod done as soon as you can, hopefully the seal held as it's still new. Not sure how to check if you got water in diff

 

Drain it is the only way I think. Rear diff breather was my first mod

 

change the oil, its easy

 

I just recently did it, breather is in my bed pocket

 

Good spot for it. Mine is in the 4Runner equivalent.

 

Ok, I'll change the rear diff. Should I be concerned about other components as well? (T-case, Manual trans, E-locker)

Anyone know the socket size by chance as well? Biggest I have is a 21.

Thank you guys

 

I think it's much smaller than a 21 if I'm remembering correctly.

 

Everything is safe but diff. Stock breather is 14mm new union from Toyota is 10

 

Oh the diff bolts, never mind lol... I'd start from 14 and check up from there