February 2010 Wet Okole Group Buy Pics!!!

Hey, can somebody tell me how to install the center console cover correctly? It kinda reminds me of a shower cap...

 

That strap goes in the back.

 

I had both seats out of the car for the install. I also folded the coin catcher up inside the wet okole cover. I have seen a picture of the a wet okole cover that had a slit in the flap that passes under the seat back. This slit was there to allow one of the lumbar cables to pass through it. My cover did not have that slit. I not worried about that cover though, because it still fit well. The passenger side has the seat that folds into a table, so it is completely different. The back rest fits great but the seat cushion does not. I have tried every thing to fix it. I think it is just to big. maybe there was a mix up with the seat cushion. it happens.

I guess my only question is weather we were suppose to get free seat back pockets or did my order get mixed up? That could explain the wrong size cushion. They were very busy.

 

As far as I know the map pockets weren't free but we did get the group buy discount.

It's quite possible there was a mix-up. They were super busy when I called and the whole process seemed very rushed. Hopefully someone else can chime in. I never got my covers yer. Hopefully mine don't get messed up

 

I was able to make that seat cushion cover work by folding it in on it's self. It's not suppose to be that way but it works and you can't see it.

I did notice writing on one of the center panels of the suspect cover. Looks like marks from when the pattern was cut. There is a dotted line and writing. It is right where you would plant you butt.

I'm not sure if it worth my time and money and wet okole's time and money to call them for new covers. Plus I am wicked inpatient.

 

Decide now because later on they may not exchange them. Maybe call and see if they will pay for faster shipping.

 

I got mine installed late last night. Between treating them with protector and installation it took a good bit of time. A little effort to work the seam areas and to get everything pulled tight really pays off in looks.

Be carful with the front seat covers on newer trucks with side airbags and VSC. The straps can interfere with wiring for the seat weight sensors and the yaw rate sensor.

If you are going to take out your seats for installation, be sure you know how to power down the SRS (air bag) system. Unhooking the wires on a live system can really ruin your day. If you mess up and power up the system with the seats out you will set circuit codes in the system that will likely need to be cleared by the dealer or a shop with a scan tool capable of accessing the system.

I hope to have pictures up soon. I am installing my RollBak cover today and have to change my oil and rotate my tires as well.

Schaweet!

 

Just got mine this morning and i installed them in the pouring rain, good first waterproof test

 

Finally got pictures of my seats

These are Black/light grey piping/White TRDoffroad log, seat heaters, and back seat pockets


Heres how the pockets look

And heres the wires for the seat heaters plugged into cigarette lighter


They still stink a little bit but just threw a coupel air fresheners in the front..its working wonders now.

 

Wow looks great.I'm very excited now. I have the back seat covers with the white logo as well. These pics really made me pleased with my decision. They look great man!

Did you get the console cover?

 

^^Thanks man. Theyre gonna be look'n sharp for sure. So comfy.

 

Looks good man!

 

I would try to hard wire those to the fuse box... it would much better and cleaner that way IMHO.

 

Well I got mine today, and pleased overall, except my TRD logo was supposed to be red and its black, looks just like your set jdkeller. How are folks dealing with the elastic parts from the bottom back of your original seats?

 

Mark, if you want red let them know.

 

I already sent Yazmin and email, see what my options are.

 

I'm gonna stick with what I got. I was able to make it work and you can't even tell that it is folded. Getting covers without the pocket would be a wast of time.

I did ding/scratch my door sill while rushing to put the passenger seat in while it was raining. It sucks and now I have to fix that. The truck must be made of tin.

I'm glad I didn't drive around with the passenger seat out while I decided what to do about the bad fit. I was close to doing it. Which is the yaw rate sensor. I was curious about the wires'

 

Yeah I dont know how to do that kind of crap haha. Its already irritating with my ipod wire hanging around as well. Im tying to ask one of my buddies if he knows how to. But I agree with ya

 

I have had mine for about a year on another GB but thought I would share.

 

Looks good man, i just got mine and the top part is really puffy...does it go down over time?