What Have You Done To Your 2nd Gen Tacoma Today?

Shitty for sure. Drill them out and throw in a rivnut maybe

 

It's a bolt and a nut anyways, so not a huge deal.

 

I went blue .. was going to go amber but I wanted something that would stand out if I left it on

 

Seems like cheaper is just as good unless you have some a need for a ton of power.

 

Ah, yeah then F it. I didn't know if it was a welded on pre threaded thinger majigger.

 

Just enlarge the holes and use a bigger washer unless that will allow it to move around

 

What brand is that? Might want to send them a pic.

 

Remade my bed stiffening brackets out of 3/16 steel

 

Correct!

 

She's shiny!

 

Yep. That's my thinking

 

What ya doing with the 275's?

 

Also, I sent them the pictures that I posted. Not really anything they can do, it's just something weird with my truck. If you flip the brackets and hold the mounting surfaces together, they are identical. The truck should be symmetric but mine is off a hair for whatever reason.

It shouldn't move around once all the bolts are in and tight.

 

Sway bar delete kit

 

Putting the skid plate back on broke two of the bolts off on the passenger side when tightening..... held on with thick ass zip ties for now until I fix it.

Any advice? Just the bolt heads broke off, the rest of the bolt is still in the welded on nut.

 

Just thread it out if there is enough to grab with a pair of vice grips.

 

Finally got some in channel vent visors. Not sure what took me so long.

 

Unfortunately there is not enough for that.

 

AVS? Initial impression?

These have been in my cart for over a year lol

 

Can you thread it through the other side of the nut?