What Have You Done To Your 2nd Gen Tacoma Today?

I have some '15 oem led tails if you're interested.

 

If you decide to sell separate I can use the driver side taillight

 

That's what I'm doing! I watched a video on how to properly use it, and apparently there is a proper way. Highly recommend looking it up.

 

How much for the tail lights?

 

I hauled a 7ft picnic table that I got as a gift for my father-in-law. I knew I got a long bed for a reason. Thing fit in the perfect & I got to close the tailgate.

 

what wheels are those?

 

LRG 103 Sandman black/milled in size 18x9 0 offset 4.5 backspacing

 

How much?

 

happy fathers day! get outside with the pops

 

Did my 80,000 mile LOF with MOBIL 1 Extended 5W-30 Full Synthetic Oil and a M-102A Mobil 1 Oil Filter too ! New Drain plug and Gasket,all OEM ! Purrs like a Kitten ! Roars Like a Lion when i get on it !

 

What if you remove the chrome covers and wrap the vinyl under the cover to keep it in place? It'll be a little more work but nothing too difficult.

 

Chrome on the bumper or mirror? My mirrors are black plastic.

 

Oh sorry. I thought the mirrors were Chrome before. Yea I would disassemble the mirror and wrap around the entire cover to help hold the edges down. You could even cheat a little bit and use gorilla tape on the back to hold down the edges.

 

Spent nearly 3 hours washing the truck, wheels, and even tires... Followed up with paint sealant. Then vacuumed and detailed the interior! Looked awesome for about 5 minutes... Then it started raining lol!!!

 

Acetone won't damage automotive paint once it's cured. Paint thinner would also work. It will strip any wax right off too. I'd would hit those spots with some wax after and you'll be good.

 

My whole damn truck needs some wax. I swear, the previous owners probably didn't know it existed. Going to wax it once the rain passes in a couple days.

 

Put an extang hard trifold tonneau cover on my taco.

 

Mine was the same, bought it April 1st and it looked and felt like a piece of white printer paper. Spent two entire days washing, clay baring, polishing and waxing, it looks great now.

 

Put wet okole on the seats

 

Installed.