What Have You Done To Your 2nd Gen Tacoma Today?

Water pump leaking?

 

Yeah water pump. Going to be replacing everything for the cooling system. Water pump, thermostat, fan clutch, and radiator.

 

Well, if you are going into it, might as well do it all at the same time so it's DONE! Check the timing chain while the water pump is off, but they should be good for 250,000 miles or more...

 

Anybody ever had their a/c discharge hose ever get cut by their fan? Happened to me the other day and it's a good thing I live in Mississippi cause it's only 197 degrees with no a/c

 

Sounds like something came unanchored under the hood and was moving around to allow the hose to get hit by the fan...

 

Yeah that's what I figured. Was debating replacing the timing chain since I'll be there. And I do have a small leak coming from the cover

 

That's what I thought at first but there ta bolted down and I guess the hose just had too much slack?

 

Something shifted or moved where it's shouldn't have...hard to think the hose could develop slack unless you recently had A/C work done and something wasn't put back right...

 

OverYarding ​

 

Oh bless you my child! #Lifesaver

 

Mmm can't wait to get my hands on that ballcock!

 

I know right!?!

 

Found a couple hours to finally install my SOS sliders

 

It's personal preference. I removed the tailgate Badges, and installed a 3" Black Retro vinyl strip. I replaced the Door Badges with OEM Pro Black ones.

 

Tint game strong!!

 

I've come to the conclusion that if the derp comes off the letters when I peel it off then I'm just gonna debadge. On try #4 to get the "toyota tacoma" bed badge derped.

 

So I sent this to Andrew from TRS but then I figured enough people here have done it that I can probably get my questions answered. Thanks in advance.

Hey Andrew. Before ordering I had a few questions about retrofitting. I have a 2015 Tacoma. Here's the order I think will work for me.


The questions I have are:

1. Under bi-xenon projectors it says LHD and RHD. Do I need to order both sides or does one order come with two of them that will work?

2. Does the Gatlin gun 1.0 shroud work with the mini d2s?

3. I currently have 9003 led bulbs. Will I need anything else to make my headlights work with these?

4. Do I need anything else at all for the install?

 

Drive to the grocery store and saw this.... landrum sc

 

The only one I know is that LHD or RHD specifies which side of the road you drive on, so that the drop off is on the right side so you're not blinding other drivers. That's why the cut off line looks like this. You want LHD.