Deeezy's Locked Sport Grocery Getter Build

I got the cooler from @bullaculla ,but iirc, it costs about $30-$40. The power steering cooler has nothing to do with the transmission, so it would be the same as what I did.

 

So did you relocate the rear shock mount?

 

This

 

He is just suggesting that an additional cooler/mod for him would be a tranny cooler. It has nothing to do with me or anyone installing a cooler for the power steering.

 

No. Why are you asking if I relocated them?

 

Yup just a suggestion. Forgot @deeezy had manual trans. Always hitting that rev limiter lol. Been researching power steering coolers, and I'm thinking due to the salt breeze from the oceans in Hawaii, I might convert to AN lines, and use an in-line heat sink cooler to save some space.

 

looked different

 

If you are talking about the lower rear shock mounts, I had to grind those down to clear the 2.5" shock.

 

This is the second time my ARB compressor switch cover broke. Piece of crap. If it happens again I'm swapping all of those ARB switches to OTRATTW. This cover was on working fine for maybe 3 months and the plastic tabs that snap on to the switch body are so weak they just break slowly during normal use.

 

Weird, I noticed the same thing on mine today when I was adding a dual stage under the hood. My old single stage switch had one corner of the switch body cracked off and the tabs on the inside broke in the same place as yours. I was thinking about ordering I whole new switch from ARB but I might look elsewhere for a replacement.

 

Yeah, I would order different switches from OTRATTW. The switches I have from there are really solid. I might end up just replacing all of those ARB switches anyway. I spent more than a new switch from OTRATTW by buying these replacement ARB covers.

 

I like the stock style push button.
http://www.aironboard.com/online/toyota-replacement.html

 

Those are nice. I stayed with the standard carling switches since I already had a couple and my switch plate in the center console was cut out for them. I wonder if someone makes a switch plate for those air on board switches.

 

Toyota

 

I'm happy with the switch I got from them as well. Fit nicely but $30/switch is expensive. I only needed one though

 

They are nice. It's too late for me to get those because I dremel'd out the stock switch openings to fit the carling ones. Lol

 

Just get a new truck.

 

Well, I'm broke AF.........but......if I did buy a different truck, it would be a dented up, old AF Toyota pickup.

 

$9 AutoEC Rocker Switch Panel Switch Holder Housing Kit - Black Plastic

https://www.amazon.com/gp/product/B011KIYQ0U/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Wonder if you put these if you can go back to a stock style switch

 

No, that bracket is even larger than a carling switch. It's made for you to cut in to a spot in your truck without a switch and add one of the switches that I have.