What Have You Done To Your 3rd Gen Today?

What wheels are these?

 

http://www.blackrhinowheels.com/off-road-wheels-rims-armory.php

 

Black rhino wheels. Model: armory

 

Nicely done! I'm sure it was much easier installing them this way rather than upside down!

 

I just got mine yesterday, so I'll be installing upside down hahaha thanks rrentrop for fast shipping

 

How easy were the skid plate letters to install and do they seem durable? Thanks!

 

It's possible, just a bit more challenging. Use plenty of the soap solution, but take extra time to ensure they are dry enough to properly adhere to the skid plate. You may want to use a blow dryer when you are done to accelerate the evaporation process.

 

I recommend installing them before you install the skid plate for best results. Installing them upside down is possible but challenging and you need to be extra cautious the first 24 hours to ensure they have fully adhered to the surface. If it is not huge task removing the skid place I strongly recommend doing so to install these.

 

Using this when I get home!

 

Do you guys SPOD? I'm about to.

https://www.youtube.com/watch?v=DyKIZSNT2H8

 

How did the glue work out? Did that do the trick?

 

I used the same stuff when I installed my sound system. Just did the doors and back wall, and it made a huge difference. I was impressed with the Noico quality. It adhered well, and the foil only ripped once or twice when putting it on the back wall. Getting into the 100+ degree days here, so we will see how it holds up over the summer.

 

Excellent! Thanks for the response. I'm still trying to figure out if this is the skid plate I want (it likely is). I'll make sure I put them on before I install!

 

As of now. It did. I put it all back together late yesterday. I did put some baking soda on it. No idea if that helped or not. I really took my time putting the bolt back in that spot and tightened it. It held. So we'll have to see later down the road if it crackes Or not.

 

Installed ECGS needle, rebalanced tires, greased u joints and still having issues.

At 50mph I have What feels like a tire out of balance, and at 72mph I have a Waaaaa waaaaa waaaaa harmonic vibration.

 

Hopefully it holds together. Let me know what you think of those headlight too.

 

Will do. I'm excited to run them at night. I work nights from 8 at night to 8 in the morning. It's still light out when I get to work. And then when I'm going home. It's still light out. I drive line haul for Fedex. Leave Escanaba MI then drive to Madison WI. Then back to Escanaba. So, I can't even try the truck out on lunch. But, this weekend... look out. I'm gonna run like batman!!!

 

Are you running aftermarket wheels? If so getting them road force balanced might help. Worked for me.

 

Stock wheels

 

Damn, sorry man!