My 3 in suspension lift, Do I need anything else?

I have a 03 4x4 TRD DC and I have put together a suspension lift. I wanted to know if you guys think I need anything else to go with it. I am doing this on a budget but if I need something else then I can go get it. Tell me what you think:
Bilstein D558TO front shocks
Bilstein D559/0560 rear shocks
rev tec 10mm lift enhancer kit
rev tec dif drop kit
wheelers add a leaf set with extended length U bolts
extended rear brake line
I have all new energy suspension bushings as well that will be going on. Am I missing anything for a solid 3in lift?

 

anybody, just tell me if im good with this or do I need something else

 

Looks good to me. The only thing that you might want to add is a shim to put under that AAL. When you lift the rear it changes the angle on your driveline, a shim will effectively rotate your axle a few degrees so that it's closer to stock angle.

It's kind of a hit or miss on a 3" lift. The best way to find out is if you have vibration coming from the rear after the AAL it's probably your driveline angle = get a shim. If no vibration then you're good!

Also, I don't know jack about the Bilstein setups really, but do you need aftermarket springs to achieve more lift? Somebody can chime in.

 

My stock springs should be fine. Ive installed a 3in before on a 98 and sued stock springs and had no problem with it. Thanks for the input. Im ordering the parts today

 

What are you paying for that setup if i might ask? There is a member on here selling their toytec 3" never used

 

getting it for about $650. I heard there are lots of problems with the toyo tec lifts for the 01-04's

 

Like what?

 

Who? Im interested