Shifter knob question

Folks. I've searched but failed! Anyhow, has anyone taken the shifter knob apart?? I want to flat black the grey part...

 

Might be easier to get some painters tape and keep it together and paint it like it is.

 

Was thinking that to. Just like to take it apart. If I can't then that might be the solution

 

Probably going to break the plastic clips that hold the plastic cover on the shifter. If you feel like risking it try and pry it off with a plastic none marring pry tool. If not then just tape it off

 

Have you seen the prices of replacing those shift knobs. Be careful if you take it apart.

 

I bought a spare off Craigslist for $20 just because I know that someday it will look like crap I'll it would bug me.

 

looks like taping it off is my only option

 

Because I'm bored.

It's really easy to take apart. I wasn't careful at all and just put a screw driver under and pryed it off.

There are a couple clips but the rest is glued. So you'll have to pop it apart and reglue it with something.

It stays together okay without glue so you might be able to get away with no glue.



In fact I snapped it back together with no glue and could get it apart with my hands.

 

Anybody want one for free? PayPal me $10 for shipping and I'll send it your way

 

Sweet
Thanks!

 

Yep. No problem!

When you do it there are some clips at the bottom that pop out first. Then the rest is glued.

I just wedged with a screwdriver then ripped it off the rest of the way. I highly doubt you can damage it.