FWP Fab Bed Rail Mounts

I was looking at that also. Its 3" wide so i think that its possible to mount quick fists there, but it depends on what you are mounting if it will fit there. I currently do not have anything that would mount there, mostly because my jack is mounted along the cab side of the bed. My ammo cans on the sides prevent my shovels from being mounted, but i have a bed rack for that.

 

If i knew the dimensions on that i would... haha I need to get my hands on one and crate a stencil of sorts

 

I can do that for you... just saying.

I still have the rotopax bases I think, or did I give those to someone, I will have to check... if I remember I will bring them to Gilmer with me.

 

I think you were supposed to give them to me so that i could make the rotopax mounts... haha.

 

Well I did now..... so get to it!

 

I did a quick look... The mounting base that you gave me will mount no problem, i will just have to see how the other part can mount to these brackets. I just dont have a rotopax.

 

The other part would just mount directly do it using some bolts, so it should work pretty easily, have the holes predrilled and such. Only part that would be an issue would be actual bed rail bolts as they would be possibly be protruding out and keep the rotopax from actually mounting.

 

ahhhh damn i didnt even think about that. You could always get a dremmel and cut the excess bolt off....

 

Any concern with the weight of a full rotopax container(s) on your bed rail mounts?

 

I wouldnt be too worried about it, i wouldnt think that the weight of 4 gallons would be any more than these hi-lift jacks.

 

Already have a high lift on them, so honestly, not really, as long as the weight is distributed it should not be an issue.

 

***New*** Hi-lift Bed Rail Mounts

These are CNC plasma cut from 1/8" aluminum, made specifically for mounting the hi-lift style jacks to the tacoma bed rails. A cutout has been added to allow a lock to be passed through the hi-lift and the mount to deter theft. Because they are specific, hardware includes everything needed so you you will not need to go to the hardware store to buy additional hardware.
$50 shipped painted with mounting hardware
$40 shipped w/o hardware & paint
Hardware includes x4 galvanized 1/2" carriage bolts, washers, nuts for mounting the brackets to the bed rails, and mounting the hi-lift to the brackets.​

Each bracket will use 2 carriage bolts, 2 nuts, and 2 washers, 1 of each will be used to mount the bracket to the bed rail, the rest will be used to mount the Hi-Lift to the bracket. Should look like something like this...

You can also see above where the holes in the lift and the brackets line up to allow a lock to pass through both.

 

Been brainstorming ways to mount my waterport on the tracks and have clearance for the roll top bed cover I use. @Zac of all trades had the right bedrail mounts. Appreciate it!

 

pm sent

 

PM replied!

 

New design for the universal mounts in stock! Same price! Incorporated tabs that will fit in the bed rails preventing the mount from shifting/rotating, single mounting point, still universal!

 

Just ordered my universal mount for my homebrew pressurized water tube, can't wait.

 

Zac...thanks for the quick delivery. Hit the brackets with some bed liner spray paint and mounted up the quick fists. Just waiting on some T-slot nuts to mount them to the rail. Great product.

 

I picked up a set from Zac (pre design tab). They work great and fit perfect.

Thanks!

 

Bumpity.

Have a potential customer for you @Zac of all trades, neighbor just bought a clone of your truck so I told him about these brackets.