@CaliRaisedLed MEGA Group Buy! (LED Lighting Products)**CLOSED**

Thanks! Glad you like them!

 

What I'm trying to say is I didn't get any brackets that attach under the hood, the actual brackets. All I got was the swivel metal bracket. Was I suppose to purchase them separately for the $55 on your website or did they come with my kit and you guys missed them? I ordered the 27w SP pods kit for 2nd gen. I got a single box with my 27w SP pods, small swivel metal brackets, and the wiring harness inside. I did not receive the actual metal brackets that bolt up under the hood. Also the picture on the website shows black swivel brackets, I got silver. Is there anyway to get black, I was just expecting to get what was in the picture. Also the box was wrapped tight in plastic but the box was deformed beyond belief just to let you know. Thanks -Austin

 

Send us a pm with your order #. If you ordered from the group buy with the code you should have received ditch brackets. We will get you taken care of.

 

Same here. Anyone know which wires to splice together to have the cali led switch power the bar but have the led on the switch illuminated at all times?

 

That happened to me.. light bar came in today. I followed instructions too

EDIT: wait just re-read sorry. So I wired it and have the illumination light on even when the truck is off... the switch works like normal to power the led bar on and off.
I think I did something wrong. I will have to double check my wiring tomorrow.

 

Okay thanks ya let me know what you come up with. I want it on all the time but just when the truck is on.

 

If you do not want the switch to illuminate at all times an add a fuse/fuse tap will have to be done with the red wire closest to the black on the switch.

 

I thought I had that wire tapped to my parking lights.

I will have to double check it and show you a photo.
but the switch is illuminated even when the truck is off and locked, and headlights/parking lights are off. It was weird, I ended up disconnecting the light bar from the battery for now.

 

https://cdn.shopify.com/s/files/1/1...tchInstallationGuide.pdf?13453767480078170433

Here is our 2nd Gen instructions.

 

thanks just saw this too. I think my wire tap may not have connected or spliced all the way.

But one last question the video says

Red to green.
white to red near green
black to black

the instructions say

White to Green/Yellow
Blue(RED?) to Red/Yellow
Black to Black

Which one is right?

 

Perfect thanks. I'll add the extra fuse

 

The video is showing on how to have the light illumined all the time vs the instructions where the light is not illumined all the time.

 

Sweet I followed the instructions. I am almost 75% sure the fuse tap or splice was Not engaged properly
Btw thanks for the replies. Kudos to you guys

 

Well so much for figuring out the wiring

 

Wowza. At fault?

 

ARE YOU OK?!?! WHAT HAPPENED

 

Pretty much rear ended a semi that had suddenly stopped at a green light.

all good no airbag deployed or injuries. so that's the most important thing.Also I didn't take a pic but from what I saw I think the lightbar survived the impact.

 

Absolute horror it happened. Absolute joy no injuries!

Hope the insurance experience isn't the worst of it.

 

Glad your Ok!

Lol at the semi that "suddenly" stopped though

 

Pretty much lol cars were going speed limit I was close enough to not notice semi slowing