What Have You Done To Your 3rd Gen Today?

Today I:
1 - Verified my ATF level (was low - nothing trickled out when the overfill plug was removed)
2 - Performed the AC mod

--The End.

I was worried I messed up the fluid level check the first time around (I changed out the crush washer with the truck shut off so some fluid drained out - I refilled about what I thought I lost and started the procedure over - with the truck running again I let the excess drain to a trickle and torqued to spec with the engine still running - everything seemed to be fine after that).

Nothing fancy yet, but I'm just getting started.

 

What model of camper top is that? I'm liking it!

 

Already get front done?

 

Oh yeah, fronts been done and I already had the standard non cdcv rear shocks but have cdcv in the front so I wanted the rears to match. Still need to add the icon s2 secondary shocks with external bypasses but the rear is done once I install the bumps

 

Question, which leaf packs are those? Cost, amount of lift. Damn..
Must be 9 or 10 leafs in there..

 

Those are Deaver u402's.. great springs. Exceptionally progressive and handle weight without sagging. I run a CVT mt Shasta extended summit series rtt, rack, camping gear and mountain bikes often and they don't say at all.

Total lift, well, I'm not really sure anymore. Everything I have tweaked. On my front icon coil overs I removed the 13 inch 650 pund springs and replaced them with 14 inch 700 springs, then the Deavers in the reat and 34 inch tires.. so probably somewhere around 4 inches id say

 

Just a little of this n that...

 

Are you using the stock HU to post these drivers?

 

Your black ones are perfect.

 

.
....Thanks!............( Now...can I axe ya another question?.... ).....

 

KC hilites amber Gravity G4 fogs match the amber of the DRL perfectly

 

Last night I was inspired by the board to replace interior and license lights with LEDs and to figure out a more practical bed storage option....

 

That Taco deserves a real bed mat!

 

You are correct, that is next on the list. That was a trim to fit universal from my pilot...

 

Did you need any adapters? Do you have a write up?? Also they show out of stock


Edit; you already answered that question thanks!

 

Placed my order for CBI Sliders and an Undercover Ridgelander truck cover w/rack............

 

Yes all stock except for speaker upgrades. Sound is fantastic and now better with the plug-n-play Subaru Kicker tweeters. Mine is the entune premium.

 

Sugarpost.com

This is a guy that makes all kinds of cool metal art. This is called a "Gnome be gone" or "GBG". Any of the medium sized GBG on his website can be turned into a hitch. Mine cost 140 with included shipping and was custom made for me. Shoot him an email and show him my pic.

 

Got the compressor installed today! Couldn't have been done without the custom bracket from @MJ_PDX


went from there to installing the hood lights from @mattgecko


I added a kill switch for those times I'm trying to be stealthy.


Wiring is starting to get heavy under here:


And now that the switchpro is full, I need to start making plans for where the next switch pro will go.

 

I may have missed it, but what lift are you running? Looks like Duratracs too?