Light Racing/SPC UCA ball joint failure

There's an older thread on this, but I didn't want to bring it back up. I went in for an alignment and my annual inspection today, and they were investigating a clunk I've had for about a month on the passenger side. Turns out the SPC ball joint is bad and has a fair amount of play. I have just under 3 weeks to get this issue solved so I can pass my inspection.

I've had the UCAs on my truck for about 20k miles and just under 15 months. Boot is intact and seems clean-ish. Should I contact SPC about this issue, or just order a new set of ball joints?

Other option is just switching out to a different UCA system all together. Should I just take the leap to Total Chaos arms? Sorry for lack of pics, there's just nothing of note to photograph.

 

I'd contact SPC they replaced mine with the new zerk ones for free

 

Sounds good, thanks. I think I'll probably end up upgrading in the near future. My initial alignment with these was a fucking nightmare.

 

Maybe the alignment tech didn't understand how to adjust them
My guy had no problem
Good luck