1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Different oil filters

Discussion in '2nd Gen. Tacomas (2005-2015)' started by DanGer, Aug 22, 2008.

  1. Aug 22, 2008 at 1:22 PM
    #1
    DanGer

    DanGer [OP] Avatar approved by 98tacomav6

    Joined:
    Jun 7, 2008
    Member:
    #7155
    Messages:
    5,480
    Gender:
    Male
    Northern Virginia & Blacksburg
    Vehicle:
    07 Base 4Cyl 4x4 Manual
    White Head Light mod, White shorty antennae, Doug Thorley Long Tube headers, AFE Drop in air filter, Secondary Air Filter Removed,
    I was picking up a few oil filters the other day and while I was looking for the oil filter with the prefix PH (the recommended) i notice a few others all by fram with the same numbers but different prefixes. I didn't give the HM (for High Mileage) mush thought since I only have 20K but the other was TG (Tough Guard). The back said that it was for tougher driving and listed as examples: stop and go, up and down hills, dusty conditions etc.

    So I was wondering if anyone could contribute their $.02 in this and let me know:
    1) Do they fit as a replacement filter?
    2) Would the TG rob fuel economy?
    3) What are basic pros/cons?


    Thanks a bunch,
    Dan
     
  2. Aug 22, 2008 at 1:57 PM
    #2
    LRH

    LRH Well-Known Member

    Joined:
    Jul 19, 2007
    Member:
    #2159
    Messages:
    303
    GA USA
    Vehicle:
    '07 2.7L PreRunner
    If you get the correct part number, it will fit and function as intended, but Fram is nowhere near the best quality filter on the market. The "high mileage" and "Tough Guard" are just ways to get you to pay a little more for a cheap filter; and will not effect mileage in any way unless it fails, in which case your fuel bill will go from whatever it is now, down to $0.00 a month. Many many people have used Frams in the past and not had problems, but dissect on and you will feel better using another, better assembled brand from a company who spends some money on R&D versus advertising.
     
  3. Aug 22, 2008 at 2:01 PM
    #3
    BillCarl

    BillCarl Enjoying my Tacoma

    Joined:
    Jun 26, 2008
    Member:
    #7588
    Messages:
    30
    Gender:
    Male
    Bluffton, SC
    Vehicle:
    2018 TRD Sport Double Cab Long Bed Blazing Pearl Blue
    Access Roll-up Tonneau Cover Toyota Stainless Steel Step Bars
    I Have an 08 with the 4.0 liter V6. I bought 10 Genuine Toyota filters (90915-YZZD3-DS) and 10 crush washers (or gaskets if you will) (90430-12031) from Frank Toyota over the Internet and paid $38 plus $7 shipping for a grand total of $45 for ten of each. So, I don't see why to bother with non Toyota oil filters.
     
  4. Aug 22, 2008 at 4:05 PM
    #4
    Janster

    Janster Old & Forgetful

    Joined:
    Mar 25, 2007
    Member:
    #1138
    Messages:
    14,339
    Gender:
    Female
    First Name:
    Jandy
    Lancaster, PA
    Vehicle:
    2016 GMC Canyon SLT w/ LineX and....
    I'm gonna get flamed again for what I'm about to say - but hey, I don't care. Tons of people use Fram filters without problems. They're not nearly as bad as everyone claims them to be. If Fram filters were that bad - they wouldn't be in business.

    Go ahead and cut one open..... Do you really know what you're looking at?
    The only people who know what a filter should look like, are the engineers who designed it. Just because you cut a filter open and it doesn't look like what you EXPECT it should - doesn't mean its a bad filter.

    I have ot laugh everytime I read these types of responses in regards to oil filters. Everyone nits & picks about how cheap & bad filters are - yet the same people don't have a clue how oil filters are designed and why.
     
  5. Aug 22, 2008 at 4:23 PM
    #5
    LRH

    LRH Well-Known Member

    Joined:
    Jul 19, 2007
    Member:
    #2159
    Messages:
    303
    GA USA
    Vehicle:
    '07 2.7L PreRunner
    Notice I did not tell him not to use Fram, as I doubt he will have an engine failure doing so. I myself do not use overpriced "boutique" filters, just what I feel are good quality. I do recommend the OP not pay extra for the Tough Guard as driving up and down hills does not call for a different filter, nor does using a high mileage filter going to do him any good except lighten his wallet. Fram needs to just make a good filter and be done with it, versus spending R&D dollars on ads and introducing some new variation of the same mediocre filter every few years or so.
     
  6. Aug 22, 2008 at 4:34 PM
    #6
    91r100gs

    91r100gs Understand the Voice Within

    Joined:
    Apr 21, 2008
    Member:
    #6100
    Messages:
    656
    Gender:
    Male
    First Name:
    Dan
    Kansas City area
    Vehicle:
    '08 Impluse Red SR5 I-4
    Factory bed mat, TacomaWorld.com sticker, EGR In-Channel Vent Visors, AFE ProDryS drop in air filter

    Have to support Janster, used nothing but Fram PH3614 on my old 91 Toyota PU, and it did not blow by 180K when it was rear ended and totaled. Still have one in the garage that was bought in about 1999. Would probably use it if the paper inside was not 10 years old. Although there are better filters for the same money, they wont ruin your car. On BITOG people have problems with filters of all makes, even Toyota OEM, Napa Gold, Ect. Heck the founder of BITOG, Bob himself, has made adapters that eliminate filters altogether, and his cars still run. The important thing is that you are changing your oil.
     
  7. Aug 22, 2008 at 5:28 PM
    #7
    DanGer

    DanGer [OP] Avatar approved by 98tacomav6

    Joined:
    Jun 7, 2008
    Member:
    #7155
    Messages:
    5,480
    Gender:
    Male
    Northern Virginia & Blacksburg
    Vehicle:
    07 Base 4Cyl 4x4 Manual
    White Head Light mod, White shorty antennae, Doug Thorley Long Tube headers, AFE Drop in air filter, Secondary Air Filter Removed,
    Thank you very much for your responses. The debates (or constructive arguments) have helped me a bunch. Even though I am in college for mechanical engineering, I have not learned anything about oil filters so i do not know how they work. For now i'm going to put in the fram PH 3614 I got from walmart for cheap and look into some better ones in the same price range. LRH...do you have any specific suggestions?

    Just pointing out that you never said not to use them, just be weary about the advertising
     
  8. Aug 22, 2008 at 8:12 PM
    #8
    WilsonTheDog

    WilsonTheDog Kylie's dad

    Joined:
    Nov 17, 2007
    Member:
    #3496
    Messages:
    4,809
    Gender:
    Male
    First Name:
    Eric
    Myrtle Beach SC
    Vehicle:
    07 Prerunner SR5 DC/SB V6
    Magnaflow 12576 muffler & chrome tip, Westin step bars, 27% tint, Pop N Lock, AFE ProdryS, bed mat, Husky liners, D-rings added, Access Literider tonneau, Pioneer 4-ways all around, GY Wrangler Duratracs 265/75/16, 5100's @ 1.75", 1.5" AAL
    Google "oil filter study" and also check out Bobistheoilguy.com. I have used Toyota filters lately because I bought 3 for a good price but my next change will be back to what I've been using for a few years on other vehicles, the Purolator PureOne. I will never use a Fram filter again.
     
  9. Aug 22, 2008 at 8:28 PM
    #9
    LRH

    LRH Well-Known Member

    Joined:
    Jul 19, 2007
    Member:
    #2159
    Messages:
    303
    GA USA
    Vehicle:
    '07 2.7L PreRunner
    ----------------------------------------------------------------------

    Wix (also sold as NAPA Gold, and CarQuest's top line; I am unsure of the name), Baldwin, Luberfiner, Donaldson are all good comercial level suppliers. Champion Industries makes flters from average to very good quality, and is the largest maker of private label filters, including the WalMart store brand, which looks very decent when cut apart. Purolator makes several good filters, but it is sometimes hard to figure which are the best assembled due to my lack of specific model trade names, but past posts here and elsewhere will help you. I know many who use NAPA Silver, which are made in the Wix Gastonia NC plant; they have a few less pleats, and a nitrile vs silicone anti drainback valve, but look good when cut apart, and can be had for $1.99-2.79 for ~80% of popular part numbers. In the end it is you; and you should use what you feel comfortable with, and if it works, keep using it....
     
  10. Aug 22, 2008 at 9:15 PM
    #10
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,503
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    +1!
    Im not an "Oil filter engineer", but out of the Hundreds of oil filters I have changed and sampled, the only ones I have had problems with have been Fram. Problems have ranged from the filtering media disintegrating, poor filtration, to all out failure. To those that use Fram, more power to ya. I wont even run a Fram filter on my Air compressor.
    Oh, btw, The Fram Tough Gaud filter I tried out on my Nissan left really cool peices of orange shit in my engine.
     
  11. Aug 22, 2008 at 10:09 PM
    #11
    HerNameIsLucy

    HerNameIsLucy I miss Lucy. :-(

    Joined:
    Jul 31, 2008
    Member:
    #8256
    Messages:
    3,026
    Gender:
    Male
    First Name:
    John
    Equador. Don't know why.
    Vehicle:
    RIP Lucy.
    She's gone but not forgotten.
    I like the K&N filters because they have the one inch nut welded to the end. Getting to the filter without pulling the skid plate off is a bi-otch. Having that nut makes it so quick...
     
  12. Aug 22, 2008 at 10:25 PM
    #12
    JJ Customs

    JJ Customs Supreme Leader!

    Joined:
    Feb 24, 2008
    Member:
    #4935
    Messages:
    5,270
    Gender:
    Male
    First Name:
    Jay
    NV
    Vehicle:
    Silverado Crew Cab Z71, 5.3 made from real Tornado's!
    A few additions to make me feel cool.
    I had a K&N leak on me once, not saying it's the filter because I may have been drinking when changing the oil however, I just don't think they are worth it. As for fram, well have never been able to bring myself to use them. I must admit I do still use the Toyota filters because I also have a 97 Taco. If you ever hear an older (22R) engine start and rattle the valves its because they do not have a Toyota filter. The Toyota filters have a rubber seal at the top that stops the oil from draining back to the oil pan in older models. As for now, the only filter I will use other than Toyota is Napa Gold, mostly because they are made by WIX for Napa. In my opinion the Napa gold filter is the one to use. And yes I have cut many open, I emplore you to do the same. It will not take long to see why to use a quality filter.
     
  13. Aug 23, 2008 at 7:22 AM
    #13
    linkfeeney

    linkfeeney Well-Known Member

    Joined:
    Dec 5, 2006
    Member:
    #393
    Messages:
    1,873
    Gender:
    Male
    First Name:
    link the stink!
    Sewell, NJ Eh!
    Vehicle:
    09 Doublecab TRD Off-Road! Magnetic Grey!
    the ones u bought from the dealers...
    was the filter made in japan or thailand?
    the ones comes with the truck orignal is made in japan, after that, if u want to buy another one they only have the ones made is thailand which is lesser quality...
    cheap bastards!
     
  14. Aug 23, 2008 at 7:35 AM
    #14
    Brunes

    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,562
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    I use K&N on my bike with special formulated oil...
    I'll be using what ever the dealership puts on while I get my included oil filters...and then I'll prolly swap to a metal reuseable filter or K&N when i start doing my own again.
     
  15. Aug 23, 2008 at 11:52 AM
    #15
    BillCarl

    BillCarl Enjoying my Tacoma

    Joined:
    Jun 26, 2008
    Member:
    #7588
    Messages:
    30
    Gender:
    Male
    Bluffton, SC
    Vehicle:
    2018 TRD Sport Double Cab Long Bed Blazing Pearl Blue
    Access Roll-up Tonneau Cover Toyota Stainless Steel Step Bars
    Yep,
    It's made in Thailand.
     
  16. Aug 23, 2008 at 2:18 PM
    #16
    Janster

    Janster Old & Forgetful

    Joined:
    Mar 25, 2007
    Member:
    #1138
    Messages:
    14,339
    Gender:
    Female
    First Name:
    Jandy
    Lancaster, PA
    Vehicle:
    2016 GMC Canyon SLT w/ LineX and....
    :thumbsup:

    After reading & discussing countless debates about Fram filters in the past - when I go to the store and I see FRAM filters on the shelf - It's like a nightmare! Immediately there are 1,000 little red devils sitting on my shoulder reminding me of all these filter debates and why I shouldn't buy them. Damn subliminal messages in my head.....

    Jesus - when I'm 75 years old and I see a Fram filter, I'm gonna vomit!! :D

    (laugh)
    Yeah, seriously....I have OEM filters cuz I buy them in bulk. I bought a bunch of OEM mopar filters for previous vehicles - so now, even the jeep gets an OEM filter. :rolleyes:
     
  17. Aug 23, 2008 at 4:33 PM
    #17
    91r100gs

    91r100gs Understand the Voice Within

    Joined:
    Apr 21, 2008
    Member:
    #6100
    Messages:
    656
    Gender:
    Male
    First Name:
    Dan
    Kansas City area
    Vehicle:
    '08 Impluse Red SR5 I-4
    Factory bed mat, TacomaWorld.com sticker, EGR In-Channel Vent Visors, AFE ProDryS drop in air filter
    You can get the Japanese made Denso from a dealer in Virginia, McGeorge Toyota. I inquired about them, and they are pricey. I was quoted $110.75 for 10 shipped to MO. They are a real nice filter. But are they worth twice what the Thialand filter costs. That up to the purchaser. PM me for the link if you are interested. They have to order them and 10 is the minimum purchase. I was quoted a 1 week turnaround time.
     
  18. Aug 23, 2008 at 7:50 PM
    #18
    wushaw

    wushaw Well-Known Member

    Joined:
    Jul 20, 2008
    Member:
    #8037
    Messages:
    98
    Texas
    Vehicle:
    08 AC TRD 4x4 6sp
    I have a Jeep TJ with 125K on the clock (no Taco yet)...sooon. But anyway I tried Fram on the Jeep, I tried four filters in a row all 5k apart and they all leaked, I was gonna go back to Wix after the first one but I had to give it a good test just to make sure it wasn't me or something....nope wasn't me that was about 50K miles ago and no leaks from any Wix I have used since.
     
  19. Aug 23, 2008 at 8:06 PM
    #19
    TacoTurd

    TacoTurd Defying Alliances since 2007

    Joined:
    Jul 19, 2007
    Member:
    #2160
    Messages:
    316
    Central Texas
    Vehicle:
    07 PreRunner TRD Sport
    TRD Exhaust, TRD CAI, Bull Bar, PIAA lights, Passport, Bed Mat, UWS Toolbox, Hood Struts, Rear TSB, TRD/Okole Seat Covers, Hellwig Rear Sway Bar, Burned Carpet, Nasty Dent in Roof
    I had an interesting experience a couple of weeks ago.

    I went into a Yoda stealership for four filters, just stocking up. I asked for Taco filters and the parts guy asked, "the big one or the little one?". :confused:

    Turns out the Toyota V8 filter fits just fine.
     
  20. Aug 24, 2008 at 5:53 AM
    #20
    Janster

    Janster Old & Forgetful

    Joined:
    Mar 25, 2007
    Member:
    #1138
    Messages:
    14,339
    Gender:
    Female
    First Name:
    Jandy
    Lancaster, PA
    Vehicle:
    2016 GMC Canyon SLT w/ LineX and....
    Which one did you end up getting? I have the 90915-YZZD3, which is an oversized filter.
     

Products Discussed in

To Top